dtu/Core/Src/key.c

#include "key.h"
#include "usart.h"
#include "interface.h"
extern Menu_table menu;
extern TipsFlag tipsflag;

bool sent1_key = false;
bool sent2_key = false;
bool sent3_key = false;
bool sent4_key = false;
struct keys key[1]={0};

char timeout[] = "+CONNECT TIMEOUT";
uint16_t S1 = 0;
uint16_t S2 = 0;
uint16_t S3 = 0;
uint16_t S4 = 0;
uint32_t enterInterface_time = 0;

void ClearBtSnItem(void);

uint8_t KEY_1_Scan(void)
{
    static uint8_t key_state = 0;
    static uint8_t last_key_state = 0;
    static uint32_t debounce_time = 0;

    key_state = HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_3); 

    if (key_state != last_key_state) // 检测按键状态变化
    {
        last_key_state = key_state;
        debounce_time = HAL_GetTick(); // 记录当前时间
    }
    else
    {
        if (HAL_GetTick() - debounce_time > 30) // 去抖时间
        {
            if (key_state == GPIO_PIN_RESET) // 按键按下
            {
				if(!sent1_key)
				{
					enterInterface_time = HAL_GetTick();
					switch(menu.current)
					{
							case 0:
							{
								
								scanMac();
								SET_MENU_STATUS(0,0,0,0);
								break;
							}
							case 1:
							{
								SET_MENU_STATUS(1,1,0,1);
								break;
							}
							case 2:
							{
								if(menu.up!=4)
								{
									menu.up+=1;
									menu.next-=1;
								}
								else if(menu.up==4)
								{
									menu.up=0;
									menu.next=4;
								}
								refresh=true;
								break;
							}
							case 3:
							{
								if(menu.up!=3)
								{
									menu.up+=1;
									menu.next-=1;
								}
								else if(menu.up==3)
								{
									menu.up=0;
									menu.next=3;
								}
								refresh=true;
								break;
							}
							case 4:
							case 5:
							case 6:
							case 7:
							case 0xA0:
							{
								if(menu.up!=1)
								{
									menu.up+=1;
									menu.next-=1;
								}
								else if(menu.up==1)
								{
									menu.up=0;
									menu.next=1;
								}
								refresh=true;
								break;
							}
							
							case 0xA1:
							{
								if(menu.up!=0xE)
								{
									menu.up+=1;
									menu.next-=1;
								}
								else if(menu.up==0xE)
								{
									menu.up=0;
									menu.next=0xE;
								}
								refresh=true;
								break;
							}
							case 0xA2:
							{
								if(menu.up!=0xF)
								{
									menu.up+=1;
									menu.next-=1;
								}
								else if(menu.up==0xF)
								{
									menu.up=0;
									menu.next=0xF;
								}
								
								refresh=true;
								break;
							}
								
					}
					#if debugkeyinfo == 1
					PRINT_MENU_STATUS("K1");
					#endif
					sent1_key = true;
				}
				return 1;
            }
            else // 按键释放
            {
				sent1_key = false;
                return 0;
            }
        }
    }

    return 0;
}

uint8_t KEY_2_Scan(void)
{
    static uint8_t key_state = 0;
    static uint8_t last_key_state = 0;
    static uint32_t debounce_time = 0;

    key_state = HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_4); 

    if (key_state != last_key_state) // 检测按键状态变化
    {
        last_key_state = key_state;
        debounce_time = HAL_GetTick(); // 记录当前时间
    }
    else
    {
        if (HAL_GetTick() - debounce_time > 30) // 去抖时间
        {
            if (key_state == GPIO_PIN_RESET) // 按键按下
            {
				if (!sent2_key)
				{
					enterInterface_time = HAL_GetTick();
					switch (menu.current)
					{
						case 0:
						{
							
							scanMac();
							SET_MENU_STATUS(0,0,0,0);
							break;
						}
						case 1:
						{
							SET_MENU_STATUS(1,0,1,1);
							break;
						}
						case 2:
						{
							if(menu.next!=4)
							{
								menu.up-=1;
								menu.next+=1;
							}
							else if(menu.next==4)
							{
								menu.up=4;
								menu.next=0;
							}
							refresh=true;
							break;
						}
						case 3:
						{
							if(menu.next!=3)
							{
								menu.up-=1;
								menu.next+=1;
							}
							else if(menu.next==3)
							{
								menu.up=3;
								menu.next=0;
							}
							refresh=true;
							break;
						}
						
						case 4:
						case 5:
						case 6:
						case 7:
						case 0xA0:
						{
							if(menu.next!=1)
							{
								menu.up-=1;
								menu.next+=1;
							}
							else if(menu.next==1)
							{
								menu.up=1;
								menu.next=0;
							}
							refresh=true;
							break;
						}
						case 0xA1:
						{
							if(menu.next!=0xE)
							{
								menu.up-=1;
								menu.next+=1;
							}
							else if(menu.next==0xE)
							{
								menu.up=0xE;
								menu.next=0;
							}
							refresh=true;
							break;
						}
						case 0xA2:
						{
							if(menu.next!=0xF)
							{
								menu.up-=1;
								menu.next+=1;
							}
							else if(menu.next==0xF)
							{
								menu.up=0xF;
								menu.next=0;
							}
							refresh=true;
							break;
						}
					}
					#if debugkeyinfo == 1
					PRINT_MENU_STATUS("K2");
					#endif
					sent2_key = true;
				}
				return 1;
            }
            else // 按键释放
            {
				sent2_key = false;
                return 0;
            }
        }
    }

    return 0;
}
// 定义menu_dict存储menu.next对应的信息
MenuInfo menu_dict[] = {
    {"AT+CONN=101000000001\r\n", "+CONNECTED:0,101000000001", "+DISCONN:0,101000000001", 0x0001},
    {"AT+CONN=101000000002\r\n", "+CONNECTED:0,101000000002", "+DISCONN:0,101000000002", 0x0002},
    {"AT+CONN=101000000003\r\n", "+CONNECTED:0,101000000003", "+DISCONN:0,101000000003", 0x0003},
    {"AT+CONN=101000000004\r\n", "+CONNECTED:0,101000000004", "+DISCONN:0,101000000004", 0x0004},
    {"AT+CONN=101000000005\r\n", "+CONNECTED:0,101000000005", "+DISCONN:0,101000000005", 0x0005},
    {"AT+CONN=101000000006\r\n", "+CONNECTED:0,101000000006", "+DISCONN:0,101000000006", 0x0006},
    {"AT+CONN=101000000007\r\n", "+CONNECTED:0,101000000007", "+DISCONN:0,101000000007", 0x0007},
    {"AT+CONN=101000000008\r\n", "+CONNECTED:0,101000000008", "+DISCONN:0,101000000008", 0x0008},
    {"AT+CONN=101000000009\r\n", "+CONNECTED:0,101000000009", "+DISCONN:0,101000000009", 0x0009},
    {"AT+CONN=10100000000A\r\n", "+CONNECTED:0,10100000000A", "+DISCONN:0,10100000000A", 0x000A},
    {"AT+CONN=10100000000B\r\n", "+CONNECTED:0,10100000000B", "+DISCONN:0,10100000000B", 0x000B},
    {"AT+CONN=10100000000C\r\n", "+CONNECTED:0,10100000000C", "+DISCONN:0,10100000000C", 0x000C},
    {"AT+CONN=10100000000D\r\n", "+CONNECTED:0,10100000000D", "+DISCONN:0,10100000000D", 0x000D},
    {"AT+CONN=10100000000E\r\n", "+CONNECTED:0,10100000000E", "+DISCONN:0,10100000000E", 0x000E},
    {"AT+CONN=10100000000F\r\n", "+CONNECTED:0,10100000000F", "+DISCONN:0,10100000000F", 0x000F},
	
    {"AT+CONN=101000000010\r\n", "+CONNECTED:0,101000000010", "+DISCONN:0,101000000010", 0x0010},
    {"AT+CONN=101000000011\r\n", "+CONNECTED:0,101000000011", "+DISCONN:0,101000000011", 0x0011},
    {"AT+CONN=101000000012\r\n", "+CONNECTED:0,101000000012", "+DISCONN:0,101000000012", 0x0012},
    {"AT+CONN=101000000013\r\n", "+CONNECTED:0,101000000013", "+DISCONN:0,101000000013", 0x0013},
    {"AT+CONN=101000000014\r\n", "+CONNECTED:0,101000000014", "+DISCONN:0,101000000014", 0x0014},
    {"AT+CONN=101000000015\r\n", "+CONNECTED:0,101000000015", "+DISCONN:0,101000000015", 0x0015},
    {"AT+CONN=101000000016\r\n", "+CONNECTED:0,101000000016", "+DISCONN:0,101000000016", 0x0016},
    {"AT+CONN=101000000017\r\n", "+CONNECTED:0,101000000017", "+DISCONN:0,101000000017", 0x0017},
    {"AT+CONN=101000000018\r\n", "+CONNECTED:0,101000000018", "+DISCONN:0,101000000018", 0x0018},
    {"AT+CONN=101000000019\r\n", "+CONNECTED:0,101000000019", "+DISCONN:0,101000000019", 0x0019},
    {"AT+CONN=10100000001A\r\n", "+CONNECTED:0,10100000001A", "+DISCONN:0,10100000001A", 0x001A},
    {"AT+CONN=10100000001B\r\n", "+CONNECTED:0,10100000001B", "+DISCONN:0,10100000001B", 0x001B},
    {"AT+CONN=10100000001C\r\n", "+CONNECTED:0,10100000001C", "+DISCONN:0,10100000001C", 0x001C},
    {"AT+CONN=10100000001D\r\n", "+CONNECTED:0,10100000001D", "+DISCONN:0,10100000001D", 0x001D},
    {"AT+CONN=10100000001E\r\n", "+CONNECTED:0,10100000001E", "+DISCONN:0,10100000001E", 0x001E},
    {"AT+CONN=10100000001F\r\n", "+CONNECTED:0,10100000001F", "+DISCONN:0,10100000001F", 0x001F},
    // 其他项依次类推
};
uint8_t KEY_3_Scan(void)
{
    static uint8_t key_state = 0;
    static uint8_t last_key_state = 0;
    static uint32_t debounce_time = 0;


    key_state = HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_5); 

    if (key_state != last_key_state) // 检测按键状态变化
    {
        last_key_state = key_state;
        debounce_time = HAL_GetTick(); // 记录当前时间
    }
    else
    {
        if (HAL_GetTick() - debounce_time > 30) // 去抖时间
        {
            if (key_state == GPIO_PIN_RESET) // 按键按下
            {
				if (!sent3_key) {
					enterInterface_time = HAL_GetTick();
					switch (menu.current) {
						case 0://跳转到菜单界面
						{
							SET_MENU_STATUS(1,1,0,1);
							break;
						}
						case 1://跳转到L绑定界面
						{
							if(menu.up==1)
							{
								scanMac();
								SET_MENU_STATUS(2,4,0,2);
							}
							else
							{
								scanMac();
								SET_MENU_STATUS(3,3,0,2);
							}
							break;
						}
						case 2:
						{
							if(menu.up==0)
							{
								//清空SN
								ClearBtSnItem();
								SET_MENU_STATUS(1,1,0,1);
								break;
							}
							else
							{
								menu.PreNext=menu.next;//L1 - L4
								SET_MENU_STATUS(0xA0,1,0,3);
								break;
							}
						}
						case 3://施解封操作
						{
							if(menu.up==3)//L1操作
							{
								sendCmd_BT(menu.SN1,menu.SN1F,3,3);
								HAL_Delay(100);
								SET_MENU_STATUS(4,1,0,3);
								break;
							}
							if(menu.up==2)//2操作
							{
								sendCmd_BT(menu.SN2,menu.SN2F,3,3);
								HAL_Delay(100);
								SET_MENU_STATUS(5,1,0,3);
								break;
							}
							if(menu.up==1)//3操作
							{
								sendCmd_BT(menu.SN3,menu.SN3F,3,3);
								HAL_Delay(100);
								SET_MENU_STATUS(6,1,0,3);
								break;
							}						
							if(menu.up==0)//4操作
							{
								sendCmd_BT(menu.SN4,menu.SN4F,3,3);
								HAL_Delay(100);
								SET_MENU_STATUS(7,1,0,3);
								break;
							}			
						}
						case 4:
						case 5:
						case 6:
						case 7:
						{
							menu.enter=4;
							break;
						}
							
						case 0xA0:
						{
							if(menu.up==1)
							{
								SET_MENU_STATUS(0xA1,0xE,0,3);
							}
							else if(menu.up==0)
							{
								SET_MENU_STATUS(0xA2,0xF,0,3);
							}
							break;
						}
						case 0xA1:
						case 0xA2:
						{
							if(menu.PreNext==0)//L1 写
							{
								if(menu.current!=0xA2)
								{
									for (int i = 0; i < sizeof(menu_dict) / sizeof(menu_dict[0]); i++) {
										if (menu.next == i) {
											menu.SN1 = menu_dict[i].command;
											menu.SN1F = menu_dict[i].connected_msg;
											menu.SN1D = menu_dict[i].disconnected_msg;
											Write_Information(Sn1Addr, menu_dict[i].value);
											L1bd=true;
										}
									}
								}
								else
								{
									for (int i = 0; i < sizeof(menu_dict) / sizeof(menu_dict[0]); i++) {
										if ((menu.next+0xf) == i) {
											menu.SN1 = menu_dict[i].command;
											menu.SN1F = menu_dict[i].connected_msg;
											menu.SN1D = menu_dict[i].disconnected_msg;
											Write_Information(Sn1Addr, menu_dict[i].value);
											L1bd=true;
										}
									}
								}
							}
							if(menu.PreNext==1)//L2 写
							{
								if(menu.current!=0xA2)
								{
									for (int i = 0; i < sizeof(menu_dict) / sizeof(menu_dict[0]); i++) {
										if (menu.next == i) {
											menu.SN2 = menu_dict[i].command;
											menu.SN2F = menu_dict[i].connected_msg;
											menu.SN2D = menu_dict[i].disconnected_msg;
											Write_Information(Sn2Addr, menu_dict[i].value);
											L2bd=true;
										}
									}
								}
								else
								{
									for (int i = 0; i < sizeof(menu_dict) / sizeof(menu_dict[0]); i++) {
										if ((menu.next+0xf) == i) {
											menu.SN2 = menu_dict[i].command;
											menu.SN2F = menu_dict[i].connected_msg;
											menu.SN2D = menu_dict[i].disconnected_msg;
											Write_Information(Sn2Addr, menu_dict[i].value);
											L2bd=true;
										}
									}
								}
							}
							if(menu.PreNext==2)//L3 写
							{
								if(menu.current!=0xA2)
								{
									for (int i = 0; i < sizeof(menu_dict) / sizeof(menu_dict[0]); i++) {
										if (menu.next == i) {
											menu.SN3 = menu_dict[i].command;
											menu.SN3F = menu_dict[i].connected_msg;
											menu.SN3D = menu_dict[i].disconnected_msg;
											Write_Information(Sn3Addr, menu_dict[i].value);
											L3bd=true;
										}
									}
								}
								else
								{
									for (int i = 0; i < sizeof(menu_dict) / sizeof(menu_dict[0]); i++) {
										if ((menu.next+0xf) == i) {
											menu.SN3 = menu_dict[i].command;
											menu.SN3F = menu_dict[i].connected_msg;
											menu.SN3D = menu_dict[i].disconnected_msg;
											Write_Information(Sn3Addr, menu_dict[i].value);
											L3bd=true;
										}
									}
								}
							}
							if(menu.PreNext==3)//L4 写
							{
								if(menu.current!=0xA2)
								{
									for (int i = 0; i < sizeof(menu_dict) / sizeof(menu_dict[0]); i++) {
										if (menu.next == i) {
											menu.SN4 = menu_dict[i].command;
											menu.SN4F = menu_dict[i].connected_msg;
											menu.SN4D = menu_dict[i].disconnected_msg;
											Write_Information(Sn4Addr, menu_dict[i].value);
											L4bd=true;
										}
									}
								}
								else
								{
									for (int i = 0; i < sizeof(menu_dict) / sizeof(menu_dict[0]); i++) {
										if ((menu.next+0xf) == i) {
											menu.SN4 = menu_dict[i].command;
											menu.SN4F = menu_dict[i].connected_msg;
											menu.SN4D = menu_dict[i].disconnected_msg;
											Write_Information(Sn4Addr, menu_dict[i].value);
											L4bd=true;
										}
									}
								}
							}
							scanMac();
							SET_MENU_STATUS(2,4,0,2);
							
							break;
						}
					}

					#if debugkeyinfo == 1
					PRINT_MENU_STATUS("K3");
					#endif
					sent3_key = true;
				}
				return 1;
            }
            else // 按键释放
            {
				sent3_key = false;
                return 0;
            }
        }
    }

    return 0;
}

uint8_t KEY_4_Scan(void)
{
    static uint8_t key_state = 0;
    static uint8_t last_key_state = 0;
    static uint32_t debounce_time = 0;

    key_state = HAL_GPIO_ReadPin(GPIOB, GPIO_PIN_6); 

    if (key_state != last_key_state) // 检测按键状态变化
    {
        last_key_state = key_state;
        debounce_time = HAL_GetTick(); // 记录当前时间
    }
    else
    {
        if (HAL_GetTick() - debounce_time > 30) // 去抖时间
        {
            if (key_state == GPIO_PIN_RESET) // 按键按下
            {
				enterInterface_time = HAL_GetTick();
				if (!sent4_key) {//返回
					switch (menu.current) {
						case 0:
						case 1:
						{
							scanMac();
							SET_MENU_STATUS(0,0,0,0);
							break;
						}
						case 2:
						case 3:
						{
							scanMac();
							SET_MENU_STATUS(1,1,0,1);
							break;
						}
						case 4:
						case 5:
						case 6:
						case 7:
						{
							sendCmd_BT("AT+DISCONN=0\r\n","ERROR",1,1);//断开连接
							HAL_Delay(30);
							S1 = read_flash_16(Sn1StatusAddr);
							S2 = read_flash_16(Sn2StatusAddr);
							S3 = read_flash_16(Sn3StatusAddr);
							S4 = read_flash_16(Sn4StatusAddr);
							scanMac();
							SET_MENU_STATUS(3,3,0,2);
							break;
						}	
						case 0xA0:
						{
							SET_MENU_STATUS(2,4,0,2);
							break;
						}
						case 0xA1:
						case 0xA2:
						{
							S1 = read_flash_16(Sn1StatusAddr);
							S2 = read_flash_16(Sn2StatusAddr);
							S3 = read_flash_16(Sn3StatusAddr);
							S4 = read_flash_16(Sn4StatusAddr);
							HAL_Delay(30);
							scanMac();
							SET_MENU_STATUS(0xA0,1,0,3);
							break;
						}
					}
					#if debugkeyinfo == 1
					PRINT_MENU_STATUS("K4");
					#endif
					sent4_key = true;
				}
				return 1;
            }
            else // 按键释放
            {
				sent4_key = false;
                return 0;
            }
        }
    }

    return 0;
}


void updatekeystate(void)
{
	KEY_1_Scan();
	KEY_2_Scan();
	KEY_3_Scan();
	KEY_4_Scan();
}


// 定义存储信息的结构体数组
struct BtMenuItem btMenuItems[] = {
    {0x0001, "0001", "AT+CONN=101000000001\r\n", "+CONNECTED:0,101000000001"},
    {0x0002, "0002", "AT+CONN=101000000002\r\n", "+CONNECTED:0,101000000002"},
    {0x0003, "0003", "AT+CONN=101000000003\r\n", "+CONNECTED:0,101000000003"},
    {0x0004, "0004", "AT+CONN=101000000004\r\n", "+CONNECTED:0,101000000004"},
    {0x0005, "0005", "AT+CONN=101000000005\r\n", "+CONNECTED:0,101000000005"},
    {0x0006, "0006", "AT+CONN=101000000006\r\n", "+CONNECTED:0,101000000006"},
    {0x0007, "0007", "AT+CONN=101000000007\r\n", "+CONNECTED:0,101000000007"},
    {0x0008, "0008", "AT+CONN=101000000008\r\n", "+CONNECTED:0,101000000008"},
    {0x0009, "0009", "AT+CONN=101000000009\r\n", "+CONNECTED:0,101000000009"},
    {0x000A, "000A", "AT+CONN=10100000000A\r\n", "+CONNECTED:0,10100000000A"},
    {0x000B, "000B", "AT+CONN=10100000000B\r\n", "+CONNECTED:0,10100000000B"},
    {0x000C, "000C", "AT+CONN=10100000000C\r\n", "+CONNECTED:0,10100000000C"},
    {0x000D, "000D", "AT+CONN=10100000000D\r\n", "+CONNECTED:0,10100000000D"},
    {0x000E, "000E", "AT+CONN=10100000000E\r\n", "+CONNECTED:0,10100000000E"},
    {0x000F, "000F", "AT+CONN=10100000000F\r\n", "+CONNECTED:0,10100000000F"},
	
    {0x0010, "0010", "AT+CONN=101000000010\r\n", "+CONNECTED:0,101000000010"},
    {0x0011, "0011", "AT+CONN=101000000011\r\n", "+CONNECTED:0,101000000011"},
    {0x0012, "0012", "AT+CONN=101000000012\r\n", "+CONNECTED:0,101000000012"},
    {0x0013, "0013", "AT+CONN=101000000013\r\n", "+CONNECTED:0,101000000013"},
    {0x0014, "0014", "AT+CONN=101000000014\r\n", "+CONNECTED:0,101000000014"},
    {0x0015, "0015", "AT+CONN=101000000015\r\n", "+CONNECTED:0,101000000015"},
    {0x0016, "0016", "AT+CONN=101000000016\r\n", "+CONNECTED:0,101000000016"},
    {0x0017, "0017", "AT+CONN=101000000017\r\n", "+CONNECTED:0,101000000017"},
    {0x0018, "0018", "AT+CONN=101000000018\r\n", "+CONNECTED:0,101000000018"},
    {0x0019, "0019", "AT+CONN=101000000019\r\n", "+CONNECTED:0,101000000019"},
    {0x001A, "001A", "AT+CONN=10100000001A\r\n", "+CONNECTED:0,10100000001A"},
    {0x001B, "001B", "AT+CONN=10100000001B\r\n", "+CONNECTED:0,10100000001B"},
    {0x001C, "001C", "AT+CONN=10100000001C\r\n", "+CONNECTED:0,10100000001C"},
    {0x001D, "001D", "AT+CONN=10100000001D\r\n", "+CONNECTED:0,10100000001D"},
    {0x001E, "001E", "AT+CONN=10100000001E\r\n", "+CONNECTED:0,10100000001E"},
    {0x001F, "001F", "AT+CONN=10100000001F\r\n", "+CONNECTED:0,10100000001F"},
};


void scanMac(void)
{
	uint16_t SN1 = read_flash_16(Sn1Addr);
	uint16_t SN2 = read_flash_16(Sn2Addr);
	uint16_t SN3 = read_flash_16(Sn3Addr);
	uint16_t SN4 = read_flash_16(Sn4Addr);
    // 匹配并设置属性
    for (int i = 0; i < sizeof(btMenuItems)/sizeof(btMenuItems[0]); i++) {
        if (SN1 == (uint16_t)i + 1) {
            menu.SN1name = btMenuItems[i].name;
            menu.SN1 = btMenuItems[i].command;
            menu.SN1F = btMenuItems[i].feedback;
            L1bd = true;
            break;
        }
    }
	
    for (int i = 0; i < sizeof(btMenuItems)/sizeof(btMenuItems[0]); i++) {
        if (SN2 == (uint16_t)i + 1) {
            menu.SN2name = btMenuItems[i].name;
            menu.SN2 = btMenuItems[i].command;
            menu.SN2F = btMenuItems[i].feedback;
            L2bd = true;
            break;
        }
    }
	
    for (int i = 0; i < sizeof(btMenuItems)/sizeof(btMenuItems[0]); i++) {
        if (SN3 == (uint16_t)i + 1) {
            menu.SN3name = btMenuItems[i].name;
            menu.SN3 = btMenuItems[i].command;
            menu.SN3F = btMenuItems[i].feedback;
            L3bd = true;
            break;
        }
    }
	
    for (int i = 0; i < sizeof(btMenuItems)/sizeof(btMenuItems[0]); i++) {
        if (SN4 == (uint16_t)i + 1) {
            menu.SN4name = btMenuItems[i].name;
            menu.SN4 = btMenuItems[i].command;
            menu.SN4F = btMenuItems[i].feedback;
            L4bd = true;
            break;
        }
    }

}

void ClearBtSnItem(void)
{						
	menu.SN1name=NULL;
	menu.SN1=NULL;
	menu.SN1F=NULL;
	menu.SN1D=NULL;
	erase_flash(Sn1StatusAddr);
	erase_flash(Sn1Addr);
	erase_flash(serialNum1Addr);
	L1bd=false;
	
	menu.SN2name=NULL;
	menu.SN2=NULL;
	menu.SN2F=NULL;
	menu.SN2D=NULL;
	
	menu.SN3name=NULL;
	menu.SN3=NULL;
	menu.SN3F=NULL;
	menu.SN3D=NULL;
	
	menu.SN4name=NULL;
	menu.SN4=NULL;
	menu.SN4F=NULL;
	menu.SN4D=NULL;
	
	erase_flash(Sn2StatusAddr);
	erase_flash(Sn3StatusAddr);
	erase_flash(Sn4StatusAddr);
	erase_flash(Sn2Addr);
	erase_flash(Sn3Addr);
	erase_flash(Sn4Addr);
	erase_flash(serialNum2Addr);
	erase_flash(serialNum3Addr);
	erase_flash(serialNum4Addr);
	L2bd=false;
	L3bd=false;
	L4bd=false;
	menu.home=0x10000;//其他地址
}