dtu/Core/Inc/ConfigMacros.h

#ifndef __CONFIGMACROS_H
#define __CONFIGMACROS_H



#include "oled.h"


#define open4G			1	
#define openBT			1	
#define updateMenu		1	
#define debugkeyinfo	0	
#define open16			11	//开字
#define open16			11	//开字
#define close16			12	//关字

#define Sn1StatusAddr					((uint32_t)0x8070000)  
#define Sn2StatusAddr					((uint32_t)0x8071000)  
#define Sn3StatusAddr					((uint32_t)0x8072000)  
#define Sn4StatusAddr					((uint32_t)0x8073000)  

#define serialNum1Addr					((uint32_t)0x8073800)  
#define serialNum2Addr					((uint32_t)0x8074000)  
#define serialNum3Addr					((uint32_t)0x8074800)  
#define serialNum4Addr					((uint32_t)0x8075000)  

#define resetDevAddr					((uint32_t)0x8075000)  
#define DevstatusAddr					((uint32_t)0x8075800)  

#define Sn1Addr							((uint32_t)0x8076000)  
#define Sn2Addr							((uint32_t)0x8076800)  
#define Sn3Addr							((uint32_t)0x8077700)  
#define Sn4Addr							((uint32_t)0x8077800)  

#define PCMQTTADDR			 "118.31.22.26"
#define PCMQTTPORT			 7883
#define PCMQTTUSER			 "test"
#define PCMQTTPSWD			 "test123"
#define PCMQTTTOPIC			 "world"
#define QOS					1
#define RETAIN				0
#define DUP 				0
#define BUFFER_SIZE 2048
#define BYTE 	uint8_t
#define WORD 	uint16_t
#define DWORD 	uint32_t
#define TT808FLAG  	0x7E
#define TCPHeadBYTE 0x2A
#define TCPTAILBYTE 0x23

#define TCPJMFSRSA  0x001
#define TCPJMFSNULL 0x000


#define JLPTIP		"121.199.29.128"
#define JLPTPORT	7342


#define LockStatusOpen  0x60
#define LockStatusClose 0x40
#define LockStatusNull  0xAA

#define XXIDzdy		0x1234
#define XXIDxfMac1	0x1235
#define XXIDxfMac2	0x1236
#define XXIDxfMac3	0x1237
#define XXIDxfMac4	0x1238





#define XXIDzdjq	0x0102
#define XXIDzdxt	0x0002 //心跳
#define XXIDzddz	0x0200


#define XXIDpttyyd	0x8001	//通用应答
#define XXIDptxxtc	0x8900	//下行透传
#define XXIDzdtyyd	0x0001	//终端通用应答



#define TIM_Start(htim) 				HAL_TIM_Base_Start_IT(htim)
#define LED_TOGGLE(pin)       			HAL_GPIO_TogglePin(GPIOC, (pin))		//运行灯
#define RXNE_UART(huart) 				__HAL_UART_ENABLE_IT(huart, UART_IT_RXNE)	


#define PRINT_MENU_STATUS(key)  		printf("--->%s pressed\t%d   %d   %x   %d\n", key, menu.current, menu.up, (menu.next&0xf), menu.enter)
#define HELLO(message) 					printf("%s\r\n", message)
#define PRINT_UUID(message) 			printf("#%s符合设置项\n",message)
#define PRINT_NUUID(message) 			printf("%s不符合\n",message)



/* SYETEM init */
#define START_PROCESS() \
    do { \
        printf("JL_DTU_BL01-start...\r\n"); \
        menu.current = 0xBB; \
        tipsflag = Starting; \
        Jump_interface(menu); \
        OLED_Refresh(); \
    } while(0)
	
/* WDI */
#define TOGGLE_WDI_PIN(htim_instance) \
do { \
    if ((htim_instance)->Instance == TIM2) { \
        HAL_GPIO_TogglePin(WDI_GPIO_Port, WDI_Pin); \
    } \
} while(0)



/* OLED显示 */
#define OLED_DISPLAY(color, display) do { \
    OLED_Init(); \
    OLED_ColorTurn(color); \
    OLED_DisplayTurn(display);  \
} while(0)


/* U1-U4 DMA */
#define IDLE_DMA_UART(huart) \
do {\
	__HAL_UART_ENABLE_IT(huart, UART_IT_IDLE); \
} while(0)



#define SET_MENU_STATUS(current_value, up_value, next_value, enter_value) \
do { \
    menu.current = current_value; \
    menu.up = up_value; \
    menu.next = next_value; \
    menu.enter = enter_value; \
	refresh = true;\
} while(0)

#define RESET_4G_MODULE() \
do { \
	if(reset4Gmodule) { \
		reset4Gmodule = false; \
		HAL_Delay(2000); \
		ML307A_Init(); \
	} \
} while(0)

#define HANDLE_RETURN_INTERFACE() \
do { \
	if(returnInterface) { \
		returnInterface = false; \
		SET_MENU_STATUS(0, 0, 0, 0); \
	} \
} while(0)


typedef struct
{
    uint8_t current;		//当前状态索引号
    uint8_t up; 			//向下一个
    uint8_t next; 			//向下一个
    uint8_t enter; 	    	//确定
	uint32_t home;
	uint8_t S1sjf;
	uint8_t S2sjf;
	uint8_t S3sjf;
	uint8_t S4sjf;
	char* SN1;
	char* SN1F;
	char* SN1D;
	char* SN1name;
	char* SN2;
	char* SN2F;
	char* SN2D;
	char* SN2name;
	char* SN3;
	char* SN3F;
	char* SN3D;
	char* SN3name;
	char* SN4;
	char* SN4F;
	char* SN4D;
	char* SN4name;
	uint8_t PreNext;
	char* LOCJ;
	char* LOCW;
	char* LOCJW;
	
} Menu_table;

struct keys
{
	unsigned char judge_sta;	//判断按键按键按下的动作到了第几步
	bool key_sta;				//如果按键被按下，为0
	bool key_flag;				//如果确认被按下，为1
	bool long_flag;				//如果确认被按下，为1
	uint8_t key_time;
};

typedef struct
{
    uint32_t serialNum1;	//4字节流水号
    uint32_t serialNum2;	//4字节流水号
    uint32_t serialNum3;	//4字节流水号
    uint32_t serialNum4;	//4字节流水号
	uint32_t userId;	//4字节userid
	uint32_t Ntime;		//4字节时间
	uint8_t	 Autoseal;	//1字节自动施封
	
} BtFrame;

typedef enum {
	BtStepDefault = 0,
    UUIDS = 1,
    UUIDN = 2,
    UUIDW = 3,
    TxPower = 4
} BtStep;


typedef enum {
    Default = 0,
    InProgress = 1,
	Abnormal_motor = 2,
	Starting = 3 ,
	Nosnset = 4 ,
	Carfail = 5
} TipsFlag;



// 定义结构体来存储对应信息
struct BtMenuItem {
    int key;
    char *name;
    char *command;
    char *feedback;
};

// 定义一个结构体存储对应关系
typedef struct {
    char *command;
    char *connected_msg;
    char *disconnected_msg;
    uint16_t value;
} MenuInfo;


typedef struct {
    uint8_t year;
    uint8_t month;
    uint8_t day;
    uint8_t hour;
    uint8_t minute;
    uint8_t second;
	
} Time;


typedef struct {
    uint8_t LSH;
	uint8_t L1Lockstatus;
	uint8_t L2Lockstatus;
	uint8_t L3Lockstatus;
	uint8_t L4Lockstatus;
	
} TT808;


typedef struct {
	
	
	uint16_t Xxid;		//消息ID
	uint16_t Xxtsx;		//消息体属性
    uint8_t  CidNum[6];	//终端ID号
	uint16_t Xxlsh;		//消息流水号
	
	
	
    uint8_t  workcmd;	//锁操作命令
	uint8_t  Cmd;		//Cmd
	uint32_t LockID;	//锁ID
	uint8_t  Gate;		//Gate
    uint8_t  Bill[8];	//Bill
	uint16_t LineCode;  //LineCode
    uint8_t  Key[6];
	uint8_t  VaildTime;	//VaildTime
	uint32_t standby;	//备用
    uint8_t  Time[6];
    uint8_t  crc;
    uint8_t  Tcrc;//后crc
	
} TCPCenterD;

typedef struct {
	
    uint8_t  workcmd;	//锁操作命令
	uint8_t  Cmd;		//Cmd
	uint32_t LockID;	//锁ID
	uint8_t  Gate;		//Gate
    uint8_t  Bill[8];	//Bill
	uint8_t  Voltage;	//Voltage
	uint8_t  LockStatus;//LockStatus
	uint8_t  MotoStatus;//MotoStatus 
	uint16_t  LineCode;  //LineCode
	uint8_t  OperationIdNum[8];//操作识别号
	uint8_t  cmdSRC;  //cmdSRC
    uint8_t  Time[6];
	
} TCPClientD;
#endif /*__CONFIGMACROS_H*/