dtu/Core/Src/main.c

/* USER CODE BEGIN Header */
/**
  ******************************************************************************
  * @file           : main.c
  * @brief          : Main program body
  ******************************************************************************
  * @attention
  *
  * Copyright (c) 2024 STMicroelectronics.
  * All rights reserved.
  *
  * This software is licensed under terms that can be found in the LICENSE file
  * in the root directory of this software component.
  * If no LICENSE file comes with this software, it is provided AS-IS.
  *
  ******************************************************************************
  */
/* USER CODE END Header */
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "cmsis_os.h"
#include "can.h"
#include "dma.h"
#include "rtc.h"
#include "spi.h"
#include "tim.h"
#include "usart.h"
#include "gpio.h"

/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */

/* USER CODE END Includes */

/* Private typedef -----------------------------------------------------------*/
/* USER CODE BEGIN PTD */

/* USER CODE END PTD */

/* Private define ------------------------------------------------------------*/
/* USER CODE BEGIN PD */

/* USER CODE END PD */

/* Private macro -------------------------------------------------------------*/
/* USER CODE BEGIN PM */


extern bool refresh;
extern TipsFlag tipsflag;
extern Menu_table menu;

extern LockInfo lockinfo;
void Jump_interface_PDA(void);

uint16_t sys_mode[2];
bool wdiFlag = false;

char version[] = "\r\nVER:dtu-20240506\r\n";

uint16_t ManualWork=1; 
/* USER CODE END PM */

/* Private variables ---------------------------------------------------------*/

/* USER CODE BEGIN PV */
/* USER CODE END PV */

/* Private function prototypes -----------------------------------------------*/
void SystemClock_Config(void);
void MX_FREERTOS_Init(void);
/* USER CODE BEGIN PFP */

/* USER CODE END PFP */

/* Private user code ---------------------------------------------------------*/
/* USER CODE BEGIN 0 */

/* USER CODE END 0 */

/**
  * @brief  The application entry point.
  * @retval int
  */
int main(void)
{
  /* USER CODE BEGIN 1 */

  /* USER CODE END 1 */

  /* MCU Configuration--------------------------------------------------------*/

  /* Reset of all peripherals, Initializes the Flash interface and the Systick. */
  HAL_Init();

  /* USER CODE BEGIN Init */

  /* USER CODE END Init */

  /* Configure the system clock */
  SystemClock_Config();

  /* USER CODE BEGIN SysInit */

  /* USER CODE END SysInit */

  /* Initialize all configured peripherals */
  MX_GPIO_Init();
  MX_DMA_Init();
  MX_SPI1_Init();
  MX_TIM2_Init();
  MX_TIM3_Init();
  MX_USART1_UART_Init();
  MX_USART2_UART_Init();
  MX_USART3_UART_Init();
  MX_UART4_Init();
  MX_UART5_Init();
  MX_SPI2_Init();
  MX_CAN_Init();
  MX_RTC_Init();
  /* USER CODE BEGIN 2 */
  HAL_TIM_Base_Start_IT(&htim2);		//wdi
  HAL_TIM_Base_Start_IT(&htim3);		//led
  OLED_DISPLAY(0,0);		//color>1 反色；display>1 翻转
  IDLE_DMA_UART(&huart1);	//开启U1中断
  HAL_UART_Receive_DMA(&huart1, U1_485recvBuff, BUFFER_SIZE); //开启U1接收
  
  IDLE_DMA_UART(&huart4);	//开启4G_DMA中断
  HAL_UART_Receive_DMA(&huart4, U4_4GrecvBuff, BUFFER_SIZE); 
  __HAL_UART_ENABLE_IT(&huart5, UART_IT_RXNE);//开启BT接收中断

  START_PROCESS();
  Database_init(0x760,0x760,0x5,0x5);//760
    
  
  MBA32A_Init();
  reset4Gmodule = true;

  ReadSNname();
  
  
  
  /* USER CODE END 2 */

  /* Call init function for freertos objects (in freertos.c) */
  MX_FREERTOS_Init();

  /* Start scheduler */
  osKernelStart();
  /* We should never get here as control is now taken by the scheduler */
  /* Infinite loop */
  /* USER CODE BEGIN WHILE */

  while (1)
  {
    /* USER CODE END WHILE */

    /* USER CODE BEGIN 3 */

  }
  /* USER CODE END 3 */
}

/**
  * @brief System Clock Configuration
  * @retval None
  */
void SystemClock_Config(void)
{
  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};

  /** Initializes the RCC Oscillators according to the specified parameters
  * in the RCC_OscInitTypeDef structure.
  */
  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI|RCC_OSCILLATORTYPE_HSE;
  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
  RCC_OscInitStruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
  RCC_OscInitStruct.LSIState = RCC_LSI_ON;
  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
  RCC_OscInitStruct.PLL.PLLMUL = RCC_PLL_MUL9;
  if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
  {
    Error_Handler();
  }

  /** Initializes the CPU, AHB and APB buses clocks
  */
  RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
                              |RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;

  if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK)
  {
    Error_Handler();
  }
  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_RTC;
  PeriphClkInit.RTCClockSelection = RCC_RTCCLKSOURCE_LSI;
  if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
  {
    Error_Handler();
  }
}
/* USER CODE BEGIN 4 */	
char mac[120];
char macStr_init[8][13]; // 长度为13的字符串加上字符串结束符'\0'
uint16_t mac_u16[24];
void ReadSNname(void)
{
	Flash_ReadBytes(&macsetptr->macCount,MacDbHeadAddr,1);//获取共存多少MAC(用于重启写入)
	if(macsetptr->macCount==0xFFFF)
	{
		macsetptr->macCount=0;
	}

	Flash_ReadBytes_mac(mac_u16,MacDbBodyAddr,3+(3*(macsetptr->macCount-1)));
	
	if(macsetptr->macCount==1)
		bin2hex(mac, (unsigned char *)mac_u16, 6);//将uint16数组转换成char数组 (FLASH中的字符串)
	else if(macsetptr->macCount==2){
		bin2hex(mac, (unsigned char *)mac_u16, 12);}//将uint16数组转换成char数组 (FLASH中的字符串)		
	else if(macsetptr->macCount==3){
		bin2hex(mac, (unsigned char *)mac_u16, 18);}//将uint16数组转换成char数组 (FLASH中的字符串)
	else if(macsetptr->macCount==4){
		bin2hex(mac, (unsigned char *)mac_u16, 24);}//将uint16数组转换成char数组 (FLASH中的字符串)
	else if(macsetptr->macCount==5){
		bin2hex(mac, (unsigned char *)mac_u16, 30);}//将uint16数组转换成char数组 (FLASH中的字符串)
	else if(macsetptr->macCount==6){
		bin2hex(mac, (unsigned char *)mac_u16, 36);}//将uint16数组转换成char数组 (FLASH中的字符串)
	else if(macsetptr->macCount==7){
		bin2hex(mac, (unsigned char *)mac_u16, 42);}//将uint16数组转换成char数组 (FLASH中的字符串)
	else if(macsetptr->macCount==8){
		bin2hex(mac, (unsigned char *)mac_u16, 48);}//将uint16数组转换成char数组 (FLASH中的字符串)

	
	// 分割mac并放入macStr数组中
	for (int i = 0; i < 8; i++) {
		strncpy(macStr_init[i], mac + i * 12, 12); // 复制12个字符到macStr中
		macStr_init[i][12] = '\0'; // 添加字符串结束符
	}		
	
	for (int i = 0; i < NUM_OF_DEVICES; i++) {
		processPdadata(macStr_init[i], macsetptr->mactemp[i], macsetptr->mac[i]);
	}
	
	for(int i = 0; i < 8; i++) {
		if(mac[i*12] == 0) {
			//Todo
			//printf("mac%d未绑定\r\n", i+1);
		} else {
			sprintf(lockinfo.SNname[i], "%s", macStr_init[i]);
		}
	}
	Process_str_collections();//处理连接字符串	
	
}
/* USER CODE END 4 */

/**
  * @brief  Period elapsed callback in non blocking mode
  * @note   This function is called  when TIM1 interrupt took place, inside
  * HAL_TIM_IRQHandler(). It makes a direct call to HAL_IncTick() to increment
  * a global variable "uwTick" used as application time base.
  * @param  htim : TIM handle
  * @retval None
  */
void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
{
  /* USER CODE BEGIN Callback 0 */

  /* USER CODE END Callback 0 */
  if (htim->Instance == TIM1) {
    HAL_IncTick();
  }
  /* USER CODE BEGIN Callback 1 */
  if(!wdiFlag)
  {
	//喂看门狗
	TOGGLE_WDI_PIN(&htim2);    
  }
  /* USER CODE END Callback 1 */
}

/**
  * @brief  This function is executed in case of error occurrence.
  * @retval None
  */
void Error_Handler(void)
{
  /* USER CODE BEGIN Error_Handler_Debug */
  /* User can add his own implementation to report the HAL error return state */
  __disable_irq();
  while (1)
  {
  }
  /* USER CODE END Error_Handler_Debug */
}

#ifdef  USE_FULL_ASSERT
/**
  * @brief  Reports the name of the source file and the source line number
  *         where the assert_param error has occurred.
  * @param  file: pointer to the source file name
  * @param  line: assert_param error line source number
  * @retval None
  */
void assert_failed(uint8_t *file, uint32_t line)
{
  /* USER CODE BEGIN 6 */
  /* User can add his own implementation to report the file name and line number,
     ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
  /* USER CODE END 6 */
}
#endif /* USE_FULL_ASSERT */