dtu/Core/Inc/ConfigMacros.h

#ifndef __CONFIGMACROS_H
#define __CONFIGMACROS_H


#include "oled.h"
#include "mba32a.h"
#include "ml307a.h"
#include <stdlib.h>
#include "interface.h"
#include <math.h>

#define BUFFER_SIZE 256
#define open4G			1	
#define openBT			1	
#define updateMenu		1	
#define debugkeyinfo	0
#define open16			11	//开字
#define open16			11	//开字
#define close16			12	//关字

#define PDA_MODE		0x0000
#define DTU_MODE		0x0001	
 
#define PRINT_MENU_STATUS(key)  		printf("--->%s pressed\t%d   %d   %x   %d\n", key, menu.current, menu.up, (menu.next&0xf), menu.enter)
#define PRINT_UUID(message) 			printf("#%s符合设置项\n",message)
#define PRINT_NUUID(message) 			printf("%s不符合\n",message)

#define Sn1InfoAddr					((uint32_t)0x8050000)  
#define Sn2InfoAddr					((uint32_t)0x8050100)  
#define Sn3InfoAddr					((uint32_t)0x8050200)  
#define Sn4InfoAddr					((uint32_t)0x8050300)  

#define serialNum1Addr				((uint32_t)0x8050400)  
#define serialNum2Addr				((uint32_t)0x8050500)  
#define serialNum3Addr				((uint32_t)0x8050600)  
#define serialNum4Addr				((uint32_t)0x8050700)  


#define resetDevAddr				((uint32_t)0x8050800)  
#define SysModeAddr					((uint32_t)0x8050900)  



#define LocDbHeadStart	((uint32_t)0x8060000)  
#define LocDbBodyStart	((uint32_t)0x8060800)  

#define EveDbHeadStart	((uint32_t)0x8070000)  
#define EveDbBodyStart	((uint32_t)0x8070800)  




//*tt808
#define JLPTIP		"121.199.29.128"
#define JLPTPORT	7342
#define MessageID_authentication	0x0102 //鉴权
#define MessageID_heartbeat			0x0002 //心跳
#define MessageID_location			0x0200 //地址
#define TCPJMFSRSA  0x001
#define TCPJMFSNULL 0x000

#define TT808FLAG  	0x7E
#define TCPHeadBYTE 0x2A
#define TCPTAILBYTE 0x23

#define XXID_pttyyd	0x8001	//通用应答
#define XXID_ptxxtc	0x8900	//下行透传
#define XXID_zdtyyd	0x0001	//终端通用应答

#define YES 0x00
#define NO  0x01

/* WDI */
#define TOGGLE_WDI_PIN(htim_instance) \
do { \
    if ((htim_instance)->Instance == TIM2) { \
        HAL_GPIO_TogglePin(WDI_GPIO_Port, WDI_Pin); \
    } \
} while(0)

/* OLED显示 */
#define OLED_DISPLAY(color, display) do { \
    OLED_Init(); \
    OLED_ColorTurn(color); \
    OLED_DisplayTurn(display);  \
} while(0)

/* U1-U4 DMA */
#define IDLE_DMA_UART(huart) \
do {\
	__HAL_UART_ENABLE_IT(huart, UART_IT_IDLE); \
} while(0)


/* SYETEM init */
#define START_PROCESS() \
    do { \
        printf("go\r\n"); \
        menu.current = 0xBB; \
        tipsflag = Starting; \
        Jump_interface(); \
        OLED_Refresh(); \
    } while(0)

#define SET_MENU_STATUS(current_value, up_value, next_value, enter_value) \
do { \
    menu.current = current_value; \
    menu.up = up_value; \
    menu.next = next_value; \
    menu.enter = enter_value; \
	refresh = true;\
} while(0)

typedef struct
{
    uint8_t current;		//当前状态索引号
    uint8_t up; 			//向下一个
    uint8_t next; 			//向下一个
    uint8_t enter; 	    	//确定
	uint32_t home;
	uint8_t PreNext;
	
} Menu_table;


#define RESET_4G_MODULE() \
do { \
	if(reset4Gmodule) { \
		reset4Gmodule = false; \
		ML307A_Init(); \
	} \
} while(0)




typedef struct
{
	//四位数字(施解封显示)
	char SN1name[5];
	char SN2name[5];
	char SN3name[5];
	char SN4name[5];
	//AT连接字符串
	char* SN1CONN;
	char* SN1ED;
	char* SN1DIS;
	char* SN2CONN;
	char* SN2ED;
	char* SN2DIS;
	char* SN3CONN;
	char* SN3ED;
	char* SN3DIS;
	char* SN4CONN;
	char* SN4ED;
	char* SN4DIS;
	//MAC
	uint16_t mac1[3];
	uint16_t mac2[3];
	uint16_t mac3[3];
	uint16_t mac4[3];
	//Status
	uint8_t L1status;
	uint8_t L2status;
	uint8_t L3status;
	uint8_t L4status;
} LockInfo;


typedef enum {
	Starting = 0,
	Btconn = 1,
	ConnOK = 2,
	ConnFail=3,
	Nosn =4,
	Timeout = 5,
	Working =6,
	FinshOK =7,
	Fail4G =8,
	Nosignal =9,
	Disconn = 0xA,
	NoSIM = 0xB,
	Back = 0xC
} TipsFlag;

struct keys
{
	unsigned char judge_sta;	//判断按键按键按下的动作到了第几步
	bool key_sta;				//如果按键被按下，为0
	bool key_flag;				//如果确认被按下，为1
	bool long_flag;				//如果确认被按下，为1
	uint8_t key_time;
};

// 定义结构体来存储对应信息
struct BtMenuItem {
    int key;
    char *name;
    char *command;
    char *feedback;
};

// 定义一个结构体存储对应关系
typedef struct {
    char *command;
    char *connected_msg;
    char *disconnected_msg;
    uint64_t mac;
} MenuInfo;

typedef struct
{
    uint32_t serialNum1;	//4字节流水号
    uint32_t serialNum2;	//4字节流水号
    uint32_t serialNum3;	//4字节流水号
    uint32_t serialNum4;	//4字节流水号
	uint32_t userId;	//4字节userid
	uint8_t	 Autoseal;	//1字节自动施封
	
} BtFrame;

typedef enum {
	BtStepDefault = 0,
    UUIDS = 1,
    UUIDN = 2,
    UUIDW = 3,
    TxPower = 4
} BtStep;

typedef struct {
	
	uint8_t LSH;
	uint8_t Rtime[6];
	uint32_t C_Seconds;
	uint8_t L1Lockstatus;
	uint8_t L2Lockstatus;
	uint8_t L3Lockstatus;
	uint8_t L4Lockstatus;
	
} TT808;



typedef struct {
	uint32_t timeStamp;
	
	//*上传数据
	uint32_t alarmFlag;		//报警标志
	uint32_t statusFlag;	//状态标志
    uint32_t latitude;		//纬度
    uint32_t longitude;		//经度
    uint16_t height;		//高度
    uint16_t speed;			//速度
    uint16_t direction;		//方向
    uint8_t timeBCD[6];		//时间戳(世纪秒)BCD
	uint8_t signalCmd;		//信号关键字
	uint8_t signalCmd_len;	//信号关键字长度
	uint8_t CSQ;			//信号强度
	uint8_t atellitesCmd;	//卫星关键字
	uint8_t atellitesCmd_len;//卫星关键字长度
	uint8_t satellitesNum;	//卫星数量
} LocationData;

typedef struct {
    uint16_t loc_pushIndex;		//入库指针
    uint16_t loc_pullIndex;		//出库指针
    uint16_t loc_pushSize;		//入库刻度
    uint16_t loc_pullSize;		//出库刻度
	
    uint16_t eve_pushIndex;		//入库指针
    uint16_t eve_pullIndex;		//出库指针
    uint16_t eve_pushSize;		//入库刻度
    uint16_t eve_pullSize;		//出库刻度
} Headinfo;


typedef struct {
    uint16_t loc_pushIndex;		//入库指针
    uint16_t loc_pullIndex;		//出库指针
    uint16_t loc_pushSize;		//入库刻度
    uint16_t loc_pullSize;		//出库刻度
	
    uint16_t eve_pushIndex;		//入库指针
    uint16_t eve_pullIndex;		//出库指针
    uint16_t eve_pushSize;		//入库刻度
    uint16_t eve_pullSize;		//出库刻度
	
	
	uint32_t alarmFlag;		//报警标志
	uint32_t statusFlag;	//状态标志
    uint32_t latitude;		//纬度
    uint32_t longitude;		//经度
    uint16_t height;		//高度
    uint16_t speed;			//速度
    uint16_t direction;		//方向
    uint8_t timeBCD[6];		//时间戳(世纪秒)BCD
	uint8_t signalCmd;		//信号关键字
	uint8_t signalCmd_len;	//信号关键字长度
	uint8_t CSQ;			//信号强度
	uint8_t atellitesCmd;	//卫星关键字
	uint8_t atellitesCmd_len;//卫星关键字长度
	uint8_t satellitesNum;	//卫星数量
	

	
} TestTemp;

typedef struct {
	Headinfo headinfo;
    LocationData location;
    TestTemp temp;
} DatabaseLoc;


typedef struct {
    Headinfo headinfo;
    LocationData location;
    uint64_t LockSn;			//锁编号
    uint16_t OperationType;		//操作类型
    uint16_t OperationResults;	//操作结果
    uint32_t perators;			//操作人
    uint16_t ElectricityLevel;	//电量
    TestTemp temp;
} DatabaseEvent;
#endif /*__CONFIGMACROS_H*/