#ifndef __W25Qxx_H
#define __W25Qxx_H
#include "gpio.h"
#include "main.h"
#include "stm32l4xx_hal_gpio.h"

#ifdef __cplusplus
 extern "C" {
#endif
#define W25X_WriteEnable		      0x06    //FLASH 写使能
#define W25X_WriteDisable		      0x04 
#define W25X_ReadStatusReg		    0x05 		//FLASH 读取状态
#define W25X_WriteStatusReg		    0x01 		//FLASH 写状态
#define W25X_ReadData			        0x03    //可低速下读FLASH数据
#define W25X_FastReadData		      0x0B 		//快速读取
#define W25X_FastReadDual		      0x3B 
#define W25X_PageProgram		      0x02    //按页写FLASH
#define W25X_BlockErase			      0xD8 
#define W25X_SectorErase		      0x20    //擦除FLASH扇区
#define W25X_ChipErase			      0xC7    //擦除FLASH块
#define W25X_PowerDown			      0xB9 		//深度掉电模式功耗1uA
#define W25X_ReleasePowerDown	    0xAB 		//退出深度掉电模式
#define W25X_DeviceID			        0xAB 
#define W25X_ManufactDeviceID   	0x90 
#define W25X_JedecDeviceID		    0x9F 		//FLASH 读ID
#define FLASH_CS_PIN        GPIO_PIN_15
#define FLASH_CS_PORT       GPIOB
 
#define SPI_FLASH_CS_LOW()       HAL_GPIO_WritePin(FLASH_CS_PORT, FLASH_CS_PIN, GPIO_PIN_RESET);
#define SPI_FLASH_CS_HIGH()      HAL_GPIO_WritePin(FLASH_CS_PORT, FLASH_CS_PIN, GPIO_PIN_SET);
static uint8_t spi1_flash_read_byte(void);
static uint8_t spi1_flash_send_byte(uint8_t byte);
static void spi1_flash_write_enable(void);
void spi1_flash_wait_for_write_end(void) ;
uint32_t spi_flash_read_ID(void);
void spi1_flash_read(uint32_t addr,uint8_t *pdata, uint16_t size);
void spi1_flash_page_write(uint32_t addr, uint8_t *pdata, uint16_t size);
void spi1_flash_write(uint32_t addr, uint8_t *pdata, uint32_t size);
void spi1_flash_sector_erase(uint32_t sector_addr);
void spi1_flash_block_erase(void);
void spi1_flash_enter_deep_power_down(void);
void spi1_flash_release_from_deep_power_down(void);
#endif