spi.h 4.1 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105
  1. /**
  2. ******************************************************************************
  3. * File Name : SPI.h
  4. * Description : This file provides code for the configuration
  5. * of the SPI instances.
  6. ******************************************************************************
  7. * This notice applies to any and all portions of this file
  8. * that are not between comment pairs USER CODE BEGIN and
  9. * USER CODE END. Other portions of this file, whether
  10. * inserted by the user or by software development tools
  11. * are owned by their respective copyright owners.
  12. *
  13. * Copyright (c) 2019 STMicroelectronics International N.V.
  14. * All rights reserved.
  15. *
  16. * Redistribution and use in source and binary forms, with or without
  17. * modification, are permitted, provided that the following conditions are met:
  18. *
  19. * 1. Redistribution of source code must retain the above copyright notice,
  20. * this list of conditions and the following disclaimer.
  21. * 2. Redistributions in binary form must reproduce the above copyright notice,
  22. * this list of conditions and the following disclaimer in the documentation
  23. * and/or other materials provided with the distribution.
  24. * 3. Neither the name of STMicroelectronics nor the names of other
  25. * contributors to this software may be used to endorse or promote products
  26. * derived from this software without specific written permission.
  27. * 4. This software, including modifications and/or derivative works of this
  28. * software, must execute solely and exclusively on microcontroller or
  29. * microprocessor devices manufactured by or for STMicroelectronics.
  30. * 5. Redistribution and use of this software other than as permitted under
  31. * this license is void and will automatically terminate your rights under
  32. * this license.
  33. *
  34. * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS"
  35. * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT
  36. * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
  37. * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY
  38. * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT
  39. * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
  40. * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
  41. * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
  42. * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
  43. * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
  44. * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
  45. * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  46. *
  47. ******************************************************************************
  48. */
  49. /* Define to prevent recursive inclusion -------------------------------------*/
  50. #ifndef __spi_H
  51. #define __spi_H
  52. #ifdef __cplusplus
  53. extern "C" {
  54. #endif
  55. /* Includes ------------------------------------------------------------------*/
  56. #include "main.h"
  57. /* USER CODE BEGIN Includes */
  58. /* USER CODE END Includes */
  59. extern SPI_HandleTypeDef hspi4;
  60. /* USER CODE BEGIN Private defines */
  61. /* USER CODE END Private defines */
  62. void MX_SPI4_Init(void);
  63. /* USER CODE BEGIN Prototypes */
  64. #define FM_WREN 0X06 //写使能
  65. #define FM_WRDI 0X04 //写禁止
  66. #define FM_RDSR 0X05 //读状态寄存器
  67. #define FM_WRSR 0X01 //写状态寄存器
  68. #define FM_READ 0X03 //读数据
  69. #define FM_WRITE 0X02 //写数据
  70. #define FM_CS_1 HAL_GPIO_WritePin(GPIOE, SPI4_FM25_NSS_Pin, GPIO_PIN_SET);
  71. #define FM_CS_0 HAL_GPIO_WritePin(GPIOE, SPI4_FM25_NSS_Pin, GPIO_PIN_RESET);
  72. void FM25L16B_Init(void);
  73. void FM25L16B_Write_N_Bytes(uint16_t addr,uint8_t *data,uint16_t num);
  74. void FM25L16B_Read_N_Bytes(uint16_t addr,uint8_t *data,uint16_t num);
  75. void FM25L16B_WriteByte(uint16_t addr,uint8_t data);
  76. uint8_t FM25L16B_ReadByte(uint16_t addr);
  77. uint8_t FM25L16B_ReadStatus(void);
  78. void FM25L16B_WriteStatus(uint8_t data);
  79. /* USER CODE END Prototypes */
  80. #ifdef __cplusplus
  81. }
  82. #endif
  83. #endif /*__ spi_H */
  84. /**
  85. * @}
  86. */
  87. /**
  88. * @}
  89. */
  90. /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/