#ifndef SD_STM32_HEADER #define SD_STM32_HEADER #include "main.h" #include "diskio.h" #include #include #include #include "obj_spi_sd_stm32.h" #include "ff_gen_drv.h" #define TRUE 1 #define FALSE 0 //#define bool char //#define BYTE char /* Definitions for MMC/SDC command */ #define CMD0 (0x40+0) /* GO_IDLE_STATE */ #define CMD1 (0x40+1) /* SEND_OP_COND */ #define CMD8 (0x40+8) /* SEND_IF_COND */ #define CMD9 (0x40+9) /* SEND_CSD */ #define CMD10 (0x40+10) /* SEND_CID */ #define CMD12 (0x40+12) /* STOP_TRANSMISSION */ #define CMD16 (0x40+16) /* SET_BLOCKLEN */ #define CMD17 (0x40+17) /* READ_SINGLE_BLOCK */ #define CMD18 (0x40+18) /* READ_MULTIPLE_BLOCK */ #define CMD23 (0x40+23) /* SET_BLOCK_COUNT */ #define CMD24 (0x40+24) /* WRITE_BLOCK */ #define CMD25 (0x40+25) /* WRITE_MULTIPLE_BLOCK */ #define CMD41 (0x40+41) /* SEND_OP_COND (ACMD) */ #define CMD55 (0x40+55) /* APP_CMD */ #define CMD58 (0x40+58) /* READ_OCR */ /*-----------------------------------------------------------------------*/ /* Device Timer Interrupt Procedure (Platform dependent) */ /*-----------------------------------------------------------------------*/ /* This function must be called in period of 10ms */ void sdcard_systick_timerproc(void); DSTATUS SD_disk_initialize(BYTE drv); DSTATUS SD_disk_status(BYTE drv); DRESULT SD_disk_read(BYTE pdrv, BYTE* buff, DWORD sector, UINT count); DRESULT SD_disk_write(BYTE pdrv, const BYTE* buff, DWORD sector, UINT count); DRESULT SD_disk_ioctl(BYTE drv, /* Physical drive nmuber (0) */ BYTE ctrl, /* Control code */ void *buff /* Buffer to send/receive control data */ ); #endif