/* USER CODE BEGIN Header */ /** ****************************************************************************** * @file : main.h * @brief : Header for main.c file. * This file contains the common defines of the application. ****************************************************************************** * This notice applies to any and all portions of this file * that are not between comment pairs USER CODE BEGIN and * USER CODE END. Other portions of this file, whether * inserted by the user or by software development tools * are owned by their respective copyright owners. * * Copyright (c) 2019 STMicroelectronics International N.V. * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted, provided that the following conditions are met: * * 1. Redistribution of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of other * contributors to this software may be used to endorse or promote products * derived from this software without specific written permission. * 4. This software, including modifications and/or derivative works of this * software, must execute solely and exclusively on microcontroller or * microprocessor devices manufactured by or for STMicroelectronics. * 5. Redistribution and use of this software other than as permitted under * this license is void and will automatically terminate your rights under * this license. * * THIS SOFTWARE IS PROVIDED BY STMICROELECTRONICS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS, IMPLIED OR STATUTORY WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A * PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY INTELLECTUAL PROPERTY * RIGHTS ARE DISCLAIMED TO THE FULLEST EXTENT PERMITTED BY LAW. IN NO EVENT * SHALL STMICROELECTRONICS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* USER CODE END Header */ /* Define to prevent recursive inclusion -------------------------------------*/ #ifndef __MAIN_H #define __MAIN_H #ifdef __cplusplus extern "C" { #endif /* Includes ------------------------------------------------------------------*/ #include #include #include #include "stm32f7xx_hal.h" #define REMOTE_IAP_UPDATA 1 //是否是远程升级 #define WATCH_DOG_ON 1 //是否打开看门狗 //0----关闭看门狗SP706 1----打开看门狗SP706 #define USE_RAM_RECORD 1 //是否启用RAM数据缓存重发机制 #if REMOTE_IAP_UPDATA>0 #define IR_ROM1 0x8080000 //APP2 #else #define IR_ROM1 0x8000000 //APP1 #endif #define USE_FATFS_RECORD 0 //FATFS文件补传功能 #define USE_TIME_FRAM 1 //FRAM中存储时间，保证掉电时间连续 extern uint32_t sd000,sd001;//浮点数转换为实时显示的参数，4字节 extern uint16_t uart4RxCounter; //串口4接收数据计数器 /* Private includes ----------------------------------------------------------*/ /* USER CODE BEGIN Includes */ #define False 0 #define True !False /* USER CODE END Includes */ /* Exported types ------------------------------------------------------------*/ /* USER CODE BEGIN ET */ /* USER CODE END ET */ /* Exported constants --------------------------------------------------------*/ /* USER CODE BEGIN EC */ /* USER CODE END EC */ /* Exported macro ------------------------------------------------------------*/ /* USER CODE BEGIN EM */ /* USER CODE END EM */ /* Exported functions prototypes ---------------------------------------------*/ void Error_Handler(void); /* USER CODE BEGIN EFP */ /* USER CODE END EFP */ /* Private defines -----------------------------------------------------------*/ #define BEEP_Pin GPIO_PIN_4 #define BEEP_GPIO_Port GPIOE #define LED1_Pin GPIO_PIN_5 #define LED1_GPIO_Port GPIOE #define DWI_Pin GPIO_PIN_2 #define DWI_GPIO_Port GPIOC #define EN_USART2_Pin GPIO_PIN_1 #define EN_USART2_GPIO_Port GPIOA #define Collect_TX_Pin GPIO_PIN_2 #define Collect_TX_GPIO_Port GPIOA #define Collect_RX_Pin GPIO_PIN_3 #define Collect_RX_GPIO_Port GPIOA #define Feeler_Lever_Pin GPIO_PIN_0 #define Feeler_Lever_GPIO_Port GPIOB #define Feeler_Lever_EXTI_IRQn EXTI0_IRQn #define LED2_Pin GPIO_PIN_7 #define LED2_GPIO_Port GPIOE #define LED3_Pin GPIO_PIN_8 #define LED3_GPIO_Port GPIOE #define LED4_Pin GPIO_PIN_9 #define LED4_GPIO_Port GPIOE #define LED5_Pin GPIO_PIN_10 #define LED5_GPIO_Port GPIOE #define SPI4_FM25_NSS_Pin GPIO_PIN_11 #define SPI4_FM25_NSS_GPIO_Port GPIOE #define SPI4_FM25_SCK_Pin GPIO_PIN_12 #define SPI4_FM25_SCK_GPIO_Port GPIOE #define SPI4_FM25_MISO_Pin GPIO_PIN_13 #define SPI4_FM25_MISO_GPIO_Port GPIOE #define SPI4_FM25_MOSI_Pin GPIO_PIN_14 #define SPI4_FM25_MOSI_GPIO_Port GPIOE #define EN_USART3_Pin GPIO_PIN_15 #define EN_USART3_GPIO_Port GPIOE #define Screen_TX_Pin GPIO_PIN_10 #define Screen_TX_GPIO_Port GPIOB #define Screen_RX_Pin GPIO_PIN_11 #define Screen_RX_GPIO_Port GPIOB #define Key10_Pin GPIO_PIN_10 #define Key10_GPIO_Port GPIOD #define Key10_EXTI_IRQn EXTI15_10_IRQn #define Key11_Pin GPIO_PIN_11 #define Key11_GPIO_Port GPIOD #define Key11_EXTI_IRQn EXTI15_10_IRQn #define Key12_Pin GPIO_PIN_12 #define Key12_GPIO_Port GPIOD #define Key12_EXTI_IRQn EXTI15_10_IRQn #define Key13_Pin GPIO_PIN_13 #define Key13_GPIO_Port GPIOD #define Key13_EXTI_IRQn EXTI15_10_IRQn #define EN_USART1_Pin GPIO_PIN_8 #define EN_USART1_GPIO_Port GPIOC #define Terminal_TX_Pin GPIO_PIN_9 #define Terminal_TX_GPIO_Port GPIOA #define Terminal_RX_Pin GPIO_PIN_10 #define Terminal_RX_GPIO_Port GPIOA #define Key_TX_Pin GPIO_PIN_10 #define Key_TX_GPIO_Port GPIOC #define Key_RX_Pin GPIO_PIN_11 #define Key_RX_GPIO_Port GPIOC #define EN_USART4_Pin GPIO_PIN_0 #define EN_USART4_GPIO_Port GPIOD /* USER CODE BEGIN Private defines */ extern uint8_t StoreNumber,all_Store; void MX_FREERTOS_Init(void); /* USER CODE END Private defines */ #ifdef __cplusplus } #endif #endif /* __MAIN_H */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/