Linetool/Line.cpp

#include "Line.h"
#include "ui_port.h"
#include "file_md5.h"
#include "data_frame.h"
#include <qsettings.h>
#include <qfiledialog.h>
#include <qtextstream.h>
#include <qfile.h>
#include <QTextCodec>
#include <QCryptographicHash>
#include <qlogging.h>
//#include <winsock.h>

QByteArray s;
int down;
#if 0
class myThread : public QThread
{
public:
	myThread();
	void run(); //声明继承于QThread虚函数 run()
public:
	void out_buff(unsigned char *buff, int size);
	int in_buff(unsigned char *buff, int time_out);
	int calcrc(const unsigned char *ptr, int count);
	int check(int crc, const unsigned char *buf, int sz);
	int xmodemTransmit(unsigned char *src, int srcsz);
public:
	QSerialPort * myserial;
};


myThread::myThread()
{

}
void myThread::run()
{
	myserial = new QSerialPort();
	myserial->setPortName("COM6");
	myserial->setBaudRate(115200, QSerialPort::AllDirections);
	myserial->setDataBits(QSerialPort::Data8);
	myserial->setParity(QSerialPort::NoParity);
	myserial->setStopBits(QSerialPort::OneStop);
	if (myserial->open(QIODevice::ReadWrite) == FALSE)
		qDebug("open error");
	else
	{
		xmodemTransmit((unsigned char*)s.data(), s.length());
		myserial->close();
	}
	down = 2;
}
#endif
Line::Line(QWidget *parent)
	: QMainWindow(parent)
{
	QActionEvent *qevent;
	myserial = NULL;
	ui.setupUi(this);
	//portmenu = new QMenu(QString::fromLocal8Bit("端口"));
	//ui.menuBar->addMenu(portmenu);
	setWindowState(Qt::WindowMaximized);
	//connect(portmenu->menuAction(), SIGNAL(portmenu->), this, SLOT(portclick()));
    //ui.menuBar->addAction(QString::fromLocal8Bit("端口"), this, SLOT(portclick()));
    //ui.menuBar->addAction(QString::fromLocal8Bit("打开"), this, SLOT(portopen()));

    ui.menuBar->addAction("端口", this, SLOT(portclick()));
    ui.menuBar->addAction("打开", this, SLOT(portopen()));

    ui.ReadStoreButton->connect(ui.ReadStoreButton,SIGNAL(clicked()),this,SLOT(ReadStore()));
    ui.SetStoreButton->connect(ui.SetStoreButton,SIGNAL(clicked()),this,SLOT(SetStore()));

    ui.CJReadversionButton->connect(ui.CJReadversionButton,SIGNAL(clicked()),this,SLOT(CJReadVersion()));
    ui.CJReadStoreButton->connect(ui.CJReadStoreButton,SIGNAL(clicked()),this,SLOT(CJReadStore()));
    ui.CJSetStoreButton->connect(ui.CJSetStoreButton,SIGNAL(clicked()),this,SLOT(CJSetStore()));

    ui.CJReadOilUnloadButton->connect(ui.CJReadOilUnloadButton,SIGNAL(clicked()),this,SLOT(CJReadOilUnload()));
    ui.CJSetOilUnloadButton->connect(ui.CJSetOilUnloadButton,SIGNAL(clicked()),this,SLOT(CJSetOilUnload()));

    ui.CJReadBottomValveButton->connect(ui.CJReadBottomValveButton,SIGNAL(clicked()),this,SLOT(CJReadBottomValve()));
    ui.CJSetBottomValveButton->connect(ui.CJSetBottomValveButton,SIGNAL(clicked()),this,SLOT(CJSetBottomValve()));

    ui.CJReadManHoleCoverButton->connect(ui.CJReadManHoleCoverButton,SIGNAL(clicked()),this,SLOT(CJReadManHoleCover()));
    ui.CJSetManHoleCoverButton->connect(ui.CJSetManHoleCoverButton,SIGNAL(clicked()),this,SLOT(CJSetManHoleCover()));

    ui.CJReadLevelTypeButton->connect(ui.CJReadLevelTypeButton,SIGNAL(clicked()),this,SLOT(CJReadLevelType()));
    ui.CJSetLevelTypeButton->connect(ui.CJSetLevelTypeButton,SIGNAL(clicked()),this,SLOT(CJSetLevelType()));

    ui.CJReadAttitudeButton->connect(ui.CJReadAttitudeButton,SIGNAL(clicked()),this,SLOT(CJReadAttitudeType()));
    ui.CJSetAttitudeButton->connect(ui.CJSetAttitudeButton,SIGNAL(clicked()),this,SLOT(CJSetAttitudeType()));

    ui.CJReadLevelZeroButton->connect(ui.CJReadLevelZeroButton,SIGNAL(clicked()),this,SLOT(CJReadLevelZero()));
    ui.CJSetLevelZeroButton->connect(ui.CJSetLevelZeroButton,SIGNAL(clicked()),this,SLOT(CJSetLevelZero()));

    ui.CJReadTemperatureTypeButton->connect(ui.CJReadTemperatureTypeButton,SIGNAL(clicked()),this,SLOT(CJReadTemperatureType()));
    ui.CJSetTemperatureTypeButton->connect(ui.CJSetTemperatureTypeButton,SIGNAL(clicked()),this,SLOT(CJSetTemperatureType()));

    ui.CJReadManHoleCoverThresholdButton->connect(ui.CJReadManHoleCoverThresholdButton,SIGNAL(clicked()),this,SLOT(CJReadManHoleCoverThreshold()));
    ui.CJSetManHoleCoverThresholdButton->connect(ui.CJSetManHoleCoverThresholdButton,SIGNAL(clicked()),this,SLOT(CJSetManHoleCoverThreshold()));


    ui.CJOilUnloadZeroButton->connect(ui.CJOilUnloadZeroButton,SIGNAL(clicked()),this,SLOT(CJSetOilUnloadZero()));
    ui.CJManHoleZeroButton->connect(ui.CJManHoleZeroButton,SIGNAL(clicked()),this,SLOT(CJSetManHoleZero()));

    ui.ReadControlVersionButton->connect(ui.ReadControlVersionButton,SIGNAL(clicked()),this,SLOT(ReadControlSoftwareVer()));

    ui.CJTransparentButton->connect(ui.CJTransparentButton,SIGNAL(clicked()),this,SLOT(CJTransparentTransmition()));


    ui.ReadControlTime->connect(ui.ReadControlTime,SIGNAL(clicked()),this,SLOT(GetControlDateTime()));
    ui.SetControlTime->connect(ui.SetControlTime,SIGNAL(clicked()),this,SLOT(SetControlDateTime()));

    ui.OpenFileButton->connect(ui.OpenFileButton,SIGNAL(clicked()),this,SLOT(on_openfile()));
    ui.UpgradeButton->connect(ui.UpgradeButton,SIGNAL(clicked()),this,SLOT(downfile()));
    ui.StopUpgradeButton->connect(ui.StopUpgradeButton,SIGNAL(clicked()),this,SLOT(StopUpGrade()));

    ui.RebootControl->connect(ui.RebootControl,SIGNAL(clicked()),this,SLOT(RebootControl()));
    ui.RebootCollect->connect(ui.RebootCollect,SIGNAL(clicked()),this,SLOT(RebootCollect()));

    ui.ReadAutoSealTime->connect(ui.ReadAutoSealTime,SIGNAL(clicked()),this,SLOT(ReadAutoSealTime()));
    ui.SetAutoSealTime->connect(ui.SetAutoSealTime,SIGNAL(clicked()),this,SLOT(SetAutoSealTime()));

    ui.SetConfig->connect(ui.SetConfig,SIGNAL(clicked()),this,SLOT(SetConfig()));
    ui.ReadConfig->connect(ui.ReadConfig,SIGNAL(clicked()),this,SLOT(ReadConfig()));

    ui.SetCoefExp->connect(ui.SetCoefExp,SIGNAL(clicked()),this,SLOT(SetCoefExp()));
    ui.ReadCoefExp->connect(ui.ReadCoefExp,SIGNAL(clicked()),this,SLOT(ReadCoefExp()));

    ui.SetUart1TimeOut->connect(ui.SetUart1TimeOut,SIGNAL(clicked()),this,SLOT(SetUart1TimeOut()));
    ui.ReadUart1TimeOut->connect(ui.ReadUart1TimeOut,SIGNAL(clicked()),this,SLOT(ReadUart1TimeOut()));

    ui.SetTankCapicity->connect(ui.SetTankCapicity,SIGNAL(clicked()),this,SLOT(SetTankCapicity()));
    ui.ReadTankCapicity->connect(ui.ReadTankCapicity,SIGNAL(clicked()),this,SLOT(ReadTankCapicity()));

    ui.ReadEnableBlankSealButton->connect(ui.ReadEnableBlankSealButton,SIGNAL(clicked()),this,SLOT(ReadBlankSeal()));
    ui.SetEnableBlankSealButton->connect(ui.SetEnableBlankSealButton,SIGNAL(clicked()),this,SLOT(SetBlankSeal()));
   // ui.tabWidget
    //ui.ReadStoreButton->connect(ui.ReadStoreButton)
	//ui.menuBar->addAction(QString::fromLocal8Bit("关闭"), this, SLOT(portclose()));
 #if 0
	ui.pushButton->connect(ui.pushButton,SIGNAL(clicked()),this,SLOT(sendaddr()));
	ui.pushButton->connect(ui.pushButton_2, SIGNAL(clicked()), this, SLOT(sendvol()));
	ui.pushButton->connect(ui.pushButton_3, SIGNAL(clicked()), this, SLOT(change_update()));
	ui.pushButton->connect(ui.pushButton_4, SIGNAL(clicked()), this, SLOT(reboot_dev()));
	ui.pushButton->connect(ui.pushButton_5, SIGNAL(clicked()), this, SLOT(Clear_dev()));
	ui.pushButton->connect(ui.pushButton_6, SIGNAL(clicked()), this, SLOT(read_line()));
	ui.pushButton->connect(ui.pushButton_7, SIGNAL(clicked()), this, SLOT(on_openfile()));
	ui.pushButton->connect(ui.pushButton_8, SIGNAL(clicked()), this, SLOT(downfile()));
	ui.pushButton->connect(ui.pushButton_9, SIGNAL(clicked()), this, SLOT(readver()));
    ui.pushButton->connect(ui.pushButton_10, SIGNAL(clicked()), this, SLOT(sendconnect()));
    ui.pushButton->connect(ui.pushButton_11, SIGNAL(clicked()), this, SLOT(readconnect()));
    ui.pushButton->connect(ui.PT_SETButton, SIGNAL(clicked()), this, SLOT(sendPT()));
    ui.pushButton->connect(ui.PT_RDButton, SIGNAL(clicked()), this, SLOT(ReadPT()));
    ui.pushButton->connect(ui.CT_SETButton, SIGNAL(clicked()), this, SLOT(sendCT()));
    ui.pushButton->connect(ui.CT_RDButton, SIGNAL(clicked()), this, SLOT(ReadCT()));
#endif


    //ui.into_cali_button->connect(ui.into_cali_button,SIGNAL(clicked()),this,SLOT(into_cali()));
    //ui.quit_cali_button->connect(ui.quit_cali_button,SIGNAL(clicked()),this,SLOT(quit_cali()));
  // // ui.get_reg->connect(ui.get_reg,SIGNAL(clicked()),this,SLOT(Read_RegVal()));
   // ui.set_reg->connect(ui.set_reg,SIGNAL(clicked()),this,SLOT(Write_RegVal()));
	portui.comboBox = NULL;
	down = 0;
	portdialog = new QDialog();
    timer_id_searil = 0;
	portui.setupUi(portdialog);
    timerid=startTimer(280);
}
void Line::textEdit_append(QString str_txt)
{
    //获取当前时间
    QDateTime current_date_time = QDateTime::currentDateTime();
    QString str = current_date_time.toString("yyyy-MM-dd hh:mm:ss.zzz ");
    str.append(str_txt);
    ui.textEdit->append(str);
}


void Line::SerialSend(QByteArray data)
{
   // QString str;
    if(myserial==NULL)
        return;
    if (myserial->isOpen())
    {
        myserial->write(data);
    }


    //获取当前时间
    QDateTime current_date_time = QDateTime::currentDateTime();
    QString str = current_date_time.toString("yyyy-MM-dd hh:mm:ss.zzz ");
    str.append("TX : ");
    //str = QString::fromUtf8("TX: ");
    str.append(data.toHex().toUpper());
    ui.textEdit->append(str);
}

uint8_t Line::MODBUS_ASCII_GetLrc(QByteArray data)
{
    uint8_t i;
    uint8_t cyLrcVal;
    int cyLen;
    QByteArray tmp=data;
    tmp.remove(0,1);
    tmp = tmp.fromHex(tmp);
    cyLen = tmp.length();
    cyLrcVal = 0;
    for (i = 0; i < cyLen; i++)
    {
        cyLrcVal +=  tmp.at(i);
    }

    cyLrcVal = ~cyLrcVal;
    cyLrcVal += 1;

    return (cyLrcVal);
}

void Line::F3send(unsigned char *buff, int size)
{
    QByteArray send_buf;
    unsigned char buf[128];
    int crc;
    int i;
    uint8_t lrc;
    QByteArray lrcbyte;

    if(ui.CJF3checkBox->isChecked())
        send_buf.append(':');

    for(i=0;i<size;++i)
    {
        send_buf.append(buff[i]);
        buf[i] = buff[i];
    }
    while(i<62)
    {
        buf[i]=0;
        send_buf.append(buf[i]);
        ++i;
    }
    crc=calcrc(buf,62);
    send_buf.append(crc&0xff);
    send_buf.append((crc>>8)&0xff);

    if(ui.CJF3checkBox->isChecked()){
        lrc=MODBUS_ASCII_GetLrc(send_buf);
        lrcbyte.append(lrc);
        send_buf.append(lrcbyte.toHex());
        send_buf.append("\r\n");
    }

    SerialSend(send_buf);
}

void Line::CJReadVersion()
{
    QByteArray buf;
    buf.append("390195500001");
    buf.append("0003");  //控制码
    buf.append("0220");  //寄存器
    buf.append("0000"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}


void Line::RebootCollect()
{
    QByteArray buf;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0010");  //寄存器
    buf.append("0006"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJReadStore()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0003");  //控制码
    buf.append("0074");  //寄存器
    buf.append("0006"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJSetStore()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0074");  //寄存器
    buf.append("0006"); //寄存器个数
    buf.append("00000000"); //保留位

    unsigned short i_val=ui.CJStoreNum->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJManHoleCoverNum->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJManHoleSmallCoverNum->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJOilUnloadingValveNum->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJBottonValveNum->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJReadOilUnload()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0003");  //控制码
    buf.append("0076");  //寄存器
    buf.append("0009"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJSetOilUnload()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0076");  //寄存器
    buf.append("0009"); //寄存器个数
    buf.append("00000000"); //保留位

    unsigned short i_val=ui.OilUnloadType->currentIndex();
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<3;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJOilUnloadingValveNum_1->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJOilUnloadingValveNum_2->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJOilUnloadingValveNum_3->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJOilUnloadingValveNum_4->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJOilUnloadingValveNum_5->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJOilUnloadingValveNum_6->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJOilUnloadingValveNum_7->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJOilUnloadingValveNum_8->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJReadBottomValve()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0003");  //控制码
    buf.append("0077");  //寄存器
    buf.append("0009"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJSetBottomValve()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0077");  //寄存器
    buf.append("0009"); //寄存器个数
    buf.append("00000000"); //保留位

    unsigned short i_val=ui.CJBottonValveType->currentIndex();
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJBottomValveNum_1->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJBottomValveNum_2->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJBottomValveNum_3->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJBottomValveNum_4->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJBottomValveNum_5->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJBottomValveNum_6->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJBottomValveNum_7->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJBottomValveNum_8->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJReadManHoleCover()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0003");  //控制码
    buf.append("0075");  //寄存器
    buf.append("0009"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJSetManHoleCover()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0075");  //寄存器
    buf.append("0009"); //寄存器个数
    buf.append("00000000"); //保留位

    unsigned short i_val=ui.CJManHoleCoverType->currentIndex();
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<3;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJManHoleCoverNum_1->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJManHoleCoverNum_2->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJManHoleCoverNum_3->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJManHoleCoverNum_4->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    i_val=ui.CJManHoleCoverNum_5->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJManHoleCoverNum_6->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJManHoleCoverNum_7->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    i_val=ui.CJManHoleCoverNum_8->text().toInt(&ok,16);
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJTransparentTransmition()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("017E");  //寄存器
    buf.append("0009"); //寄存器个数
    buf.append("00000000"); //保留位

    buf.append("0000");

    unsigned short i_val=ui.CJTransparentChannelNo->currentIndex();
    sprintf(buf_tmp,"%04X",i_val);
    for(i=0;i<4;++i)
    {
        buf.append(buf_tmp[i]);
    }
    if(ui.CJTransparentTx->text().length()<2)
    {
        return;
    }
    i_val = ui.CJTransparentTx->text().length()/2;
    sprintf(buf_tmp,"%04X",i_val);
    for(i=0;i<4;++i)
    {
        buf.append(buf_tmp[i]);
    }
    buf.append(ui.CJTransparentTx->text());
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJReadLevelType()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0003");  //控制码
    buf.append("0078");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJSetLevelType()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0078");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位

    unsigned short i_val=ui.CJLevelType->currentIndex();
    sprintf(buf_tmp,"%04X",i_val);
    for(i=0;i<4;++i)
    {
        buf.append(buf_tmp[i]);
    }

    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}


void Line::CJReadAttitudeType()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0003");  //控制码
    buf.append("0079");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJSetAttitudeType()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0079");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位

    unsigned short i_val=ui.CJAttitudeType->currentIndex();
    sprintf(buf_tmp,"%04X",i_val);
    for(i=0;i<4;++i)
    {
        buf.append(buf_tmp[i]);
    }

    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJReadTemperatureType()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0003");  //控制码
    buf.append("007A");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJSetTemperatureType()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("007A");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位

    unsigned short i_val=ui.CJTemperatureType->currentIndex();
    sprintf(buf_tmp,"%02X",i_val);
    for(i=0;i<2;++i)
    {
        buf.append(buf_tmp[i]);
    }

    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJReadManHoleCoverThreshold()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0003");  //控制码
    buf.append("0072");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJSetManHoleCoverThreshold()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0072");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位

    unsigned short i_val=ui.CJManHoleCoverThreshold->text().toUInt();
    sprintf(buf_tmp,"%04X",i_val);
    for(i=0;i<4;++i)
    {
        buf.append(buf_tmp[i]);
    }

    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJReadLevelZero()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0003");  //控制码
    buf.append("0190");  //寄存器
    buf.append("0012"); //寄存器个数
    buf.append("00000000"); //保留位
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJSetLevelZero()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0190");  //寄存器
    buf.append("0012"); //寄存器个数
    buf.append("00000000"); //保留位

    float f_val=ui.CJLevelZero_1->text().toFloat();
    buf.append(FloattoHex(f_val));
    f_val=ui.CJLevelZero_2->text().toFloat();
    buf.append(FloattoHex(f_val));
    f_val=ui.CJLevelZero_3->text().toFloat();
    buf.append(FloattoHex(f_val));
    f_val=ui.CJLevelZero_4->text().toFloat();
    buf.append(FloattoHex(f_val));
    f_val=ui.CJLevelZero_5->text().toFloat();
    buf.append(FloattoHex(f_val));
    f_val=ui.CJLevelZero_6->text().toFloat();
    buf.append(FloattoHex(f_val));
    f_val=ui.CJLevelZero_7->text().toFloat();
    buf.append(FloattoHex(f_val));
    f_val=ui.CJLevelZero_8->text().toFloat();
    buf.append(FloattoHex(f_val));
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}


void Line::CJSetOilUnloadZero()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0050");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位

    unsigned short i_val=ui.CJOilUnloadZeroStoreNum->currentIndex()+0x11;
    sprintf(buf_tmp,"%04X",i_val);
    for(i=0;i<4;++i)
    {
        buf.append(buf_tmp[i]);
    }
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

void Line::CJSetManHoleZero()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    int i;
    char buf_tmp[32];
    uint8_t lrc;
    buf.append("390195500001");
    buf.append("0006");  //控制码
    buf.append("0052");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位

    unsigned short i_val=ui.CJManHoleZeroStoreNum->currentIndex()+0x31;
    sprintf(buf_tmp,"%04X",i_val);
    for(i=0;i<4;++i)
    {
        buf.append(buf_tmp[i]);
    }
    buf=buf.fromHex(buf);
    F3send((unsigned char *)buf.data(),buf.size());
}

QByteArray Line::FloattoHex(float f_val)
{
    unsigned char *p_tr = (unsigned char*)&f_val;
    QByteArray buf;
    for(int i=0;i<4;++i)
    {
        buf.append(*(p_tr+3-i));
    }
    buf = buf.toHex();
    return buf;
}

void Line::ReadStore()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append(":390100000000");
    buf.append("0003");  //控制码
    buf.append("00A4");  //寄存器
    buf.append("0000"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::SetStore()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    uint8_t lrc;
    buf.append(":390100000000");
    buf.append("0006");  //控制码
    buf.append("00A4");  //寄存器
    buf.append("0014"); //寄存器个数
    buf.append("00000000"); //保留位
    float f_val=ui.StoreNum->text().toInt(&ok,16);
    buf.append(FloattoHex(f_val));
    f_val=ui.ManHoleCoverNum->text().toInt(&ok,16);
    buf.append(FloattoHex(f_val));
    f_val=ui.ManHoleSmallCoverNum->text().toInt(&ok,16);
    buf.append(FloattoHex(f_val));
    f_val=ui.OilUnloadingValveNum->text().toInt(&ok,16);
    buf.append(FloattoHex(f_val));
    f_val=ui.BottonValveNum->text().toInt(&ok,16);
    buf.append(FloattoHex(f_val));
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::RebootControl()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append(":390100000000");
    buf.append("0003");  //控制码
    buf.append("020C");  //寄存器
    buf.append("0000"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::ReadTankCapicity()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append(":390100000000");
    buf.append("0003");  //控制码
    buf.append("031C");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::SetTankCapicity()
{
    QByteArray buf;
    uint8_t lrc;
    QByteArray lrcbyte;
    buf.append(":390100000000");
    buf.append("0006");  //控制码
    buf.append("031C");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc = 0;
    if(ui.TankCapicity->checkState()==Qt::CheckState::Checked)
    {
        lrc=1;
    }
    lrcbyte.clear();
    lrcbyte.append(lrc);
    //buf.append(lrcbyte.toHex());
    lrc=MODBUS_ASCII_GetLrc(buf);
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::ReadBlankSeal()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append(":390100000000");
    buf.append("0003");  //控制码
    buf.append("07A4");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::SetBlankSeal()
{
    QByteArray buf;
    uint8_t lrc;
    QByteArray lrcbyte;
    buf.append(":390100000000");
    buf.append("0006");  //控制码
    buf.append("07A4");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc = 0;
    if(ui.EnableBlankSeal->checkState()==Qt::CheckState::Checked)
    {
        lrc=1;
    }
    lrcbyte.clear();
    lrcbyte.append(lrc);
    //buf.append(lrcbyte.toHex());
    lrc=MODBUS_ASCII_GetLrc(buf);
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::ReadAutoSealTime()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append(":390100000000");
    buf.append("0003");  //控制码
    buf.append("0024");  //寄存器
    buf.append("0002"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::ReadControlSoftwareVer()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append(":390100000000");
    buf.append("0003");  //控制码
    buf.append("0220");  //寄存器
    buf.append("0008"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::SetAutoSealTime()
{
    QByteArray buf;
    uint32_t SealTime;
    uint8_t lrc;
    char tmp_buf[8];
    buf.append(":390100000000");
    buf.append("0006");  //控制码
    buf.append("0024");  //寄存器
    buf.append("0002"); //寄存器个数
    buf.append("00000000"); //保留位
    SealTime = ui.AutoSealTime->text().toUInt();
    sprintf(tmp_buf,"%04X",SealTime);
    buf.append(QString(tmp_buf));
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::ReadUart1TimeOut()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append(":390100000000");
    buf.append("0003");  //控制码
    buf.append("0318");  //寄存器
    buf.append("0004"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::SetUart1TimeOut()
{
    QByteArray buf;
    uint8_t lrc;
    float f_val;
    char *ptr;
    int i;
    buf.append(":390100000000");
    buf.append("0006");  //控制码
    buf.append("0318");  //寄存器
    buf.append("0004"); //寄存器个数
    buf.append("00000000"); //保留位
    f_val=ui.Uart1_TimeOut->text().toFloat();
    ptr = (char *)&f_val;
    for(i=0;i<4;++i)
    {
        QByteArray arry;
        arry.append(ptr[3-i]);
        buf.append(arry.toHex());
    }
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::ReadCoefExp()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append(":390100000000");
    buf.append("0003");  //控制码
    buf.append("00E4");  //寄存器
    buf.append("0032"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::SetCoefExp()
{
    QByteArray buf;
    uint8_t lrc;
    float f_val;
    char *ptr;
    int i;
    QByteArray f_array;
    buf.append(":390100000000");
    buf.append("0006");  //控制码
    buf.append("00E4");  //寄存器
    buf.append("0032"); //寄存器个数
    buf.append("00000000"); //保留位
    f_val=ui.CoefExp1->text().toFloat();
    ptr = (char *)&f_val;
    for(i=0;i<4;++i)
    {
        QByteArray arry;
        arry.append(ptr[3-i]);
        buf.append(arry.toHex());
    }
    f_val=ui.CoefExp2->text().toFloat();
    ptr = (char *)&f_val;
    for(i=0;i<4;++i)
    {
        QByteArray arry;
        arry.append(ptr[3-i]);
        buf.append(arry.toHex());
    }
    f_val=ui.CoefExp3->text().toFloat();
    ptr = (char *)&f_val;
    for(i=0;i<4;++i)
    {
        QByteArray arry;
        arry.append(ptr[3-i]);
        buf.append(arry.toHex());
    }
    f_val=ui.CoefExp4->text().toFloat();
    ptr = (char *)&f_val;
    for(i=0;i<4;++i)
    {
        QByteArray arry;
        arry.append(ptr[3-i]);
        buf.append(arry.toHex());
    }
    f_val=ui.CoefExp5->text().toFloat();
    ptr = (char *)&f_val;
    for(i=0;i<4;++i)
    {
        QByteArray arry;
        arry.append(ptr[3-i]);
        buf.append(arry.toHex());
    }
    f_val=ui.CoefExp6->text().toFloat();
    ptr = (char *)&f_val;
    for(i=0;i<4;++i)
    {
        QByteArray arry;
        arry.append(ptr[3-i]);
        buf.append(arry.toHex());
    }
    f_val=ui.CoefExp7->text().toFloat();
    ptr = (char *)&f_val;
    for(i=0;i<4;++i)
    {
        QByteArray arry;
        arry.append(ptr[3-i]);
        buf.append(arry.toHex());
    }
    f_val=ui.CoefExp8->text().toFloat();
    ptr = (char *)&f_val;
    for(i=0;i<4;++i)
    {
        QByteArray arry;
        arry.append(ptr[3-i]);
        buf.append(arry.toHex());
    }
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::ReadConfig()
{
    QByteArray buf;
    uint8_t lrc;
    buf.append(":390100000000");
    buf.append("0003");  //控制码
    buf.append("4000");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::SetConfig()
{
    QByteArray buf;
    uint8_t lrc;
    QByteArray lrcbyte;
    buf.append(":390100000000");
    buf.append("0006");  //控制码
    buf.append("4000");  //寄存器
    buf.append("0001"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc = 0;
    if(ui.Level->checkState()==Qt::CheckState::Checked)
    {
        lrc|=0x80;
    }
    if(ui.Pressure->checkState()==Qt::CheckState::Checked)
    {
        lrc|=0x40;
    }
    if(ui.PoweroffSave->checkState()==Qt::CheckState::Checked)
    {
        lrc|=0x20;
    }
    if(ui.DoubleOil->checkState()==Qt::CheckState::Checked)
    {
        lrc|=0x10;
    }
    if(ui.ReSeal->checkState()==Qt::CheckState::Checked)
    {
        lrc|=0x8;
    }
    if(ui.lcd5->checkState()==Qt::CheckState::Checked)
    {
        lrc|=0x4;
    }
    if(ui.Reserved->checkState()==Qt::CheckState::Checked)
    {
        lrc|=0x2;
    }
    if(ui.AutoSeal->checkState()==Qt::CheckState::Checked)
    {
        lrc|=0x1;
    }
    lrcbyte.clear();
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    lrc=MODBUS_ASCII_GetLrc(buf);
    lrcbyte.clear();
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::GetControlDateTime()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    uint8_t lrc;
    QDateTime qtime;
    buf.append(":390100000000");
    buf.append("0003");  //控制码
    buf.append("01CC");  //寄存器
    buf.append("0006"); //寄存器个数
    buf.append("00000000"); //保留位
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
}

void Line::SetControlDateTime()
{
    QByteArray buf;
    QByteArray tmp;
    bool ok;
    uint8_t lrc;
    QDateTime qtime;
    buf.append(":390100000000");
    buf.append("0006");  //控制码
    buf.append("01CC");  //寄存器
    buf.append("0006"); //寄存器个数
    buf.append("00000000"); //保留位
    //qtime.setDate(QDateTime::currentDateTime().date());
    //qtime.setTime(QDateTime::currentDateTime().time());
    qtime = QDateTime::currentDateTime();
    tmp.clear();
    tmp.append(qtime.date().year()-2000);
    tmp=tmp.toHex();
    buf.append(tmp);
    tmp.clear();
    tmp.append(qtime.date().month());
    tmp=tmp.toHex();
    buf.append(tmp);
    tmp.clear();
    tmp.append(qtime.date().day());
    tmp=tmp.toHex();
    buf.append(tmp);
    tmp.clear();
    tmp.append(qtime.time().hour());
    tmp=tmp.toHex();
    buf.append(tmp);
    tmp.clear();
    tmp.append(qtime.time().minute());
    tmp=tmp.toHex();
    buf.append(tmp);
    tmp.clear();
    tmp.append(qtime.time().second());
    tmp=tmp.toHex();
    buf.append(tmp);
    lrc=MODBUS_ASCII_GetLrc(buf);
    QByteArray lrcbyte;
    lrcbyte.append(lrc);
    buf.append(lrcbyte.toHex());
    buf.append("\r\n");
    SerialSend(buf);
    qDebug("%s",qtime.toString("yyyy-MM-dd hh:mm:ss").toUtf8().data());
}


void Line::timerEvent_old(QTimerEvent *event)
{
	int i;
	unsigned int int_val;
    float f_val;
	QString str;
    QByteArray tt;
	QString send_buf;
	char buf[16];
	//qDebug("TIME");
    ui.dateTimeEdit->setDateTime(QDateTime::currentDateTime());
	if (myserial == NULL)
	{
		sendflag = 0;
		return;
	}
    /*if (down >= 3)
	{
		myserial->close();
		killTimer(timerid);
		timerid = startTimer(100);
		portopen();
		down = 0;
    }*/
    if (down==1 && sendflag)
	{
		xmodemTransmit((unsigned char*)s.data(), s.length());
        sendflag = 0;
		return;
	}
	if (!myserial->isOpen())
	{
		sendflag = 0;
		return;
	}
	
	/*if (down)
	{
		xmodemTransmit((unsigned char*)s.data(), s.length());
		return;
	}*/
	if(sendflag)
	{
        if(down)
        {
            xmodemTransmit((unsigned char*)s.data(), s.length());
            sendflag=0;
            return;
        }
		if (myserial->isOpen())
		{
 #if 1
            switch(sendflag)
            {
                case 1:
                    ReadStore();
                    break;
                case 2:
                    GetControlDateTime();
                    break;
                case 3:
                    ReadAutoSealTime();
                    break;
                case 4:
                    ReadConfig();
                    break;
                case 5:
                    ReadCoefExp();
                    break;
                case 6:
                    ReadUart1TimeOut();
                    break;
                case 7:
                    ReadTankCapicity();
                    break;
                case 8:
                    ReadBlankSeal();
                    break;
                case 9:
                    ReadControlSoftwareVer();
                    break;
                default:
                    sendflag=0;
                    return;
            }
            ++sendflag;
#else
            sendflag=0;
#endif
		}
		return;
	}

}

void Line::timerEvent(QTimerEvent *event)
{
    if(event->timerId() == timer_id_searil)
    {
        //label2 每隔1秒+1
        Receive_Data();
    }
    else
    {
        timerEvent_old(event);
    }
}

void Line::readver()
{
	int retry;
	unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x11,0x01,0x75,0x87,0x16 };
	memcpy(keyvalue, buf, 14);
	recvflag = 0;
	sendflag = 14;
	retry = 0;
}

void Line::read_line()
{
	int retry;
	unsigned char buf[32] = {0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x11,0x01,0x68,0x7A,0x16};
	memcpy(keyvalue, buf, 14);
	recvflag = 0;
	sendflag = 14;
	retry = 0;
#if 0
	do
	{
		Sleep(200);
		if (recvflag == 14)
		{
			if (keyvalue[11] & 0x1)
			{
				ui.radioButton12->setChecked(TRUE);
			}
			else
			{
				ui.radioButton11->setChecked(TRUE);
			}
			if (keyvalue[11] & 0x2)
			{
				ui.radioButton_22->setChecked(TRUE);
			}
			else
			{
				ui.radioButton_21->setChecked(TRUE);
			}
			if (keyvalue[11] & 0x4)
			{
				ui.radioButton_32->setChecked(TRUE);
			}
			else
			{
				ui.radioButton_31->setChecked(TRUE);
			}
			if (keyvalue[11] & 0x8)
			{
				ui.radioButton_42->setChecked(TRUE);
			}
			else
			{
				ui.radioButton_41->setChecked(TRUE);
			}
			if (keyvalue[11] & 0x10)
			{
				ui.radioButton_52->setChecked(TRUE);
			}
			else
			{
				ui.radioButton_51->setChecked(TRUE);
			}
			if (keyvalue[11] & 0x20)
			{
				ui.radioButton_62->setChecked(TRUE);
			}
			else
			{
				ui.radioButton_61->setChecked(TRUE);
			}
			if (keyvalue[11] & 0x40)
			{
				ui.radioButton_72->setChecked(TRUE);
			}
			else
			{
				ui.radioButton_71->setChecked(TRUE);
			}
			if (keyvalue[11] & 0x80)
			{
				ui.radioButton_82->setChecked(TRUE);
			}
			else
			{
				ui.radioButton_81->setChecked(TRUE);
			}
			recvflag = 0;
			break;
		}
	} while (++retry < 30);
#endif
}

void Line::change_update()
{
	unsigned  char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x03,0x7D,0xAA,0x55,0x93,0x16 };
	memcpy(keyvalue, buf, 16);
	sendflag = 16;
}

void Line::reboot_dev()
{
	unsigned  char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x03,0x7D,0x55,0xAA,0x93,0x16 };
	memcpy(keyvalue, buf, 16);
	sendflag = 16;
}

void Line::Clear_dev()
{
	unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x01,0x79,0x8e,0x16 };
	memcpy(keyvalue, buf, 14);
	sendflag = 14;
}

void Line::sendaddr()
{
#if 0
	unsigned short addr;
	int i;
	unsigned  char buf[32] = {0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x03,0x67 };
	memcpy(keyvalue, buf, 12);
	addr = ui.lineEdit->text().toInt();
	keyvalue[12] = addr & 0xff;
	keyvalue[13] = (addr>>8) & 0xff;
	keyvalue[14] = 0;
	for (i = 1; i < 14; ++i)
		keyvalue[14] += keyvalue[i];
	keyvalue[15] = 0x16;
	sendflag = 16;
#endif
}

void Line::sendconnect()
{
#if 0
    unsigned short addr;
    int i;
    unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x02,0x73 };
    memcpy(keyvalue, buf, 12);
    if(ui.comboBox->currentIndex())
    {
        keyvalue[12] = 0x34;
    }
    else
    {
        keyvalue[12] = 0x33;
    }

    keyvalue[13] = 0;
    for (i = 1; i < 13; ++i)
        keyvalue[13] += keyvalue[i];
    keyvalue[14] = 0x16;
    sendflag = 15;
#endif
}

void Line::readconnect()
{
    unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x11,0x01,0x73,0x85,0x16 };
    memcpy(keyvalue, buf, 14);
    sendflag = 14;
}

void Line::sendCT()
{
#if  0
    unsigned short addr;
    int i;
    float val;
    unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x05,0x66 };
    memcpy(keyvalue, buf, 12);
    val=ui.CTEdit->text().toFloat();
    memcpy(keyvalue+12,&val,4);
    keyvalue[16] = 0;
    for (i = 1; i < 16; ++i)
        keyvalue[16] += keyvalue[i];
    keyvalue[17] = 0x16;
    sendflag = 18;
#endif
}

void Line::ReadCT()
{
    unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x11,0x01,0x66,0x85,0x16 };
    int i;
    memcpy(keyvalue, buf, 14);
    keyvalue[12] = 0;
    for (i = 1; i < 12; ++i)
        keyvalue[12] += keyvalue[i];
    keyvalue[13] = 0x16;
    sendflag = 14;
}

void Line::sendPT()
{
#if 0
    unsigned short addr;
    int i;
    float val;
    unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x05,0x65 };
    memcpy(keyvalue, buf, 12);
    val=ui.PT_Edit->text().toFloat();
    memcpy(keyvalue+12,&val,4);
    keyvalue[16] = 0;
    for (i = 1; i < 16; ++i)
        keyvalue[16] += keyvalue[i];
    keyvalue[17] = 0x16;
    sendflag = 18;
#endif
}

void Line::ReadPT()
{
#if 0
    unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x11,0x01,0x65,0x85,0x16 };
    int i;
    memcpy(keyvalue, buf, 14);
    keyvalue[12] = 0;
    for (i = 1; i < 12; ++i)
        keyvalue[12] += keyvalue[i];
    keyvalue[13] = 0x16;
    sendflag = 14;
#endif
}

void Line::into_cali()
{

    unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x02,0x78,0x3d,0xcb,0x16 };
    memcpy(keyvalue, buf, 15);
    sendflag = 15;
}
void Line::quit_cali()
{

    unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x02,0x78,0x00,0x8e,0x16 };
    memcpy(keyvalue, buf, 15);
    sendflag = 15;
}

void Line::sendvol()
{
#if 0
	unsigned short addr;
	int i;
	unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x02,0x68 };
	memcpy(keyvalue, buf, 12);
	keyvalue[12] = 0;
	if (ui.radioButton12->isChecked())
		keyvalue[12] = 1;
	if (ui.radioButton_22->isChecked())
		keyvalue[12] |= 0x2;
	if (ui.radioButton_32->isChecked())
		keyvalue[12] |= 0x4;
	if (ui.radioButton_42->isChecked())
		keyvalue[12] |= 0x8;
	if (ui.radioButton_52->isChecked())
		keyvalue[12] |= 0x10;
	if (ui.radioButton_62->isChecked())
		keyvalue[12] |= 0x20;
	if (ui.radioButton_72->isChecked())
		keyvalue[12] |= 0x40;
	if (ui.radioButton_82->isChecked())
		keyvalue[12] |= 0x80;
	keyvalue[13] = 0;
	for (i = 1; i < 13; ++i)
		keyvalue[13] += keyvalue[i];
	keyvalue[14] = 0x16;
	sendflag = 15;
#endif
}

void Line::Read_RegVal()
{
#if 0
    unsigned short addr;
    int i;
    unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x11,0x04,0x7A,0x01,0x04,0xF8,0x00,0x68 };
    memcpy(keyvalue, buf, 17);
    buf[12] = ui.chan_box->currentIndex();
    switch(ui.reg_box->currentIndex())
    {
        case 0:
        case 1:
        case 2:
            buf[13] = ui.reg_box->currentIndex()+0x1a;
            break;
        case 3:
        case 4:
        case 5:
            buf[13] = ui.reg_box->currentIndex()+0x17-3;
            break;
        case 6:
        case 7:
        case 8:
            buf[13] = ui.reg_box->currentIndex()+0x4-6;
            break;
        default:
            break;
    }
    memcpy(keyvalue,buf,17);
    keyvalue[15] = 0;
    for (i = 1; i < 15; ++i)
        keyvalue[15] += keyvalue[i];
    keyvalue[16] = 0x16;
    sendflag = 17;
#endif
}

void Line::Write_RegVal()
{
#if 0
    unsigned short addr;
    int i;
    unsigned char buf[32] = { 0xFE,0x68,0x88,0x88,0x88,0x88,0x88,0x88,0x68,0x14,0x05,0x7A,0x01,0x04,0xF8,0x00,0x68 };
    memcpy(keyvalue, buf, 12);
    buf[12] = ui.chan_box->currentIndex();
    switch(ui.reg_box->currentIndex())
    {
        case 0:
        case 1:
        case 2:
            buf[13] = ui.reg_box->currentIndex()+0x1a;
            break;
        case 3:
        case 4:
        case 5:
            buf[13] = ui.reg_box->currentIndex()+0x17-3;
            break;
        case 6:
        case 7:
        case 8:
            buf[13] = ui.reg_box->currentIndex()+0x4-6;
            break;
        default:
            break;
    }
    addr = ui.reg_edit->text().toUInt(Q_NULLPTR, 16);
    buf[14] = addr&0xff;
    buf[15] = (addr>>8)&0xff;
    memcpy(keyvalue,buf,17);
    keyvalue[16] = 0;
    for (i = 1; i < 16; ++i)
        keyvalue[16] += keyvalue[i];
    keyvalue[17] = 0x16;
    sendflag = 18;
#endif
}

void Line::portopen()
{
	if(myserial==NULL)
    {
        myserial = new QSerialPort();
        connect(myserial,SIGNAL(readyRead()),this,SLOT(Receive_Data()));
    }

	if (portui.comboBox == NULL)
		return;
	if (!portui.comboBox->count())
		return;
	if (myserial->isOpen())
	{
		myserial->close();
        //ui.menuBar->actions().at(1)->setText(QString::fromLocal8Bit("打开"));
        ui.menuBar->actions().at(1)->setText("打开");
		return;
	}
	myserial->close();
	myserial->setPortName(portui.comboBox->currentText());
	qDebug("%s",portui.comboBox->currentText().toUtf8().data());
	myserial->setBaudRate(portui.comboBox_2->currentText().toInt(), QSerialPort::AllDirections);
	qDebug("%s", portui.comboBox_2->currentText().toUtf8().data());
	qDebug("%s", portui.comboBox_3->currentText().toUtf8().data());
	qDebug("%s", portui.comboBox_4->currentText().toUtf8().data());
	qDebug("%s", portui.comboBox_5->currentText().toUtf8().data());
	switch (portui.comboBox_3->currentIndex())
	{
        case 0:
            myserial->setDataBits(QSerialPort::Data7);
            break;
        case 1:
        default:
            myserial->setDataBits(QSerialPort::Data8);
            break;
	}
	switch (portui.comboBox_4->currentIndex())
	{
        case 1:
            myserial->setStopBits(QSerialPort::TwoStop);
            break;
        case 0:
        default:
            myserial->setStopBits(QSerialPort::OneStop);
            break;

	}
	switch (portui.comboBox_5->currentIndex())
	{
        case 1:
            myserial->setParity(QSerialPort::OddParity);
            break;
        case 2:
            myserial->setParity(QSerialPort::EvenParity);
            break;
        case 0:
        default:
            myserial->setParity(QSerialPort::NoParity);
            break;
	}
	if (myserial->open(QIODevice::ReadWrite)==FALSE)
    {
        qDebug("open error");
        textEdit_append("串口打开错误！\r\n");
    }
	else
	{
		//ui.menuBar->activeAction()->setIconText("xx");
        //ui.menuBar->actions().at(1)->setText(QString::fromLocal8Bit("关闭"));
        ui.menuBar->actions().at(1)->setText("关闭");

	}



    sendflag=1;
}

void Line::on_openfile()
{
    QString fileName = QFileDialog::getOpenFileName(this, QString::fromLocal8Bit("选择文件"), "D:\\", tr("*.bin"));
	int n;
	if (!fileName.isEmpty())
	{
		QFile qfile(fileName);
        fileName.toUtf8();
        //qDebug("%s", fileName.toUtf8());
		if (!qfile.open(QIODevice::ReadOnly))
		{
			return;
		}
        s.clear();
		s=qfile.readAll();
//		ui.textEdit->clear();
		//QDataStream in(&qfile);
		//in.setVersion(QDataStream::Qt_5_7);
		//in.device()->seek(0);
		//in >> s;
		qfile.close();
        ui.FileNameEdit->setText(fileName);
        //ui.textEdit->append(QString::fromLocal8Bit("打开文件:"));
        //ui.textEdit->append(fileName);
    //	ui.textEdit->append(QString::fromLocal8Bit("成功:"));
        down = 0;
		//qDebug("%d", n);
		//QDebug<<n<<s;
		
	}
}

void Line::Simulation_OilUnloadSend(QByteArray command)
{
    QByteArray send_buf;
    if(command.at(0)>=0x11 && command.at(0)<=0x1F)
    {
        int crc;
        QString str;
        send_buf.clear();
        send_buf.append(command.at(0));
        send_buf.append(command.at(1));
        send_buf.append(2);
       // str.prepend(command.toHex());
       // qDebug(str.toLatin1());
        switch(command.at(0))
        {
            case 0x11:
                send_buf.append(ui.OilUnloadOpen_1->isChecked());
                send_buf.append(ui.OilUnloadHave_1->isChecked());
                break;
            case 0x12:
            send_buf.append(ui.OilUnloadOpen_2->isChecked());
            send_buf.append(ui.OilUnloadHave_2->isChecked());
            break;
            case 0x13:
            send_buf.append(ui.OilUnloadOpen_3->isChecked());
            send_buf.append(ui.OilUnloadHave_3->isChecked());
            break;
        case 0x14:
        send_buf.append(ui.OilUnloadOpen_4->isChecked());
        send_buf.append(ui.OilUnloadHave_4->isChecked());
        break;
        case 0x15:
        send_buf.append(ui.OilUnloadOpen_5->isChecked());
        send_buf.append(ui.OilUnloadHave_5->isChecked());
        break;
        case 0x16:
        send_buf.append(ui.OilUnloadOpen_6->isChecked());
        send_buf.append(ui.OilUnloadHave_6->isChecked());
        break;
        case 0x17:
        send_buf.append(ui.OilUnloadOpen_7->isChecked());
        send_buf.append(ui.OilUnloadHave_7->isChecked());
        break;
        case 0x18:
        send_buf.append(ui.OilUnloadOpen_8->isChecked());
        send_buf.append(ui.OilUnloadHave_8->isChecked());
        break;
        default:
                break;
        }
        crc=calcrc((const unsigned char*)send_buf.data(),send_buf.length());
        send_buf.append((crc>>8)&0xff);
        send_buf.append(crc&0xff);

        myserial->write(send_buf);
        //str.prepend(send_buf.toHex());
      //  qDebug(str.toLatin1());
    }
}

void Line::Simulation_AngleSend(QByteArray command)
{
    QByteArray send_buf;
    if(command.at(0)>=0x30 && command.at(0)<=0x3F)
    {
        int crc;
        QString str;
        unsigned int f_angle;
        send_buf.clear();
        send_buf.append(command.at(0));
        send_buf.append(command.at(1));
        send_buf.append(4);
        switch(command.at(0))
        {
            case 0x30:
            f_angle = ui.BaseAngle->text().toUInt();
            break;
            case 0x31:
                f_angle = ui.Angle_1->text().toUInt();
                break;
        case 0x32:
            f_angle = ui.Angle_2->text().toUInt();
            break;
        case 0x33:
            f_angle = ui.Angle_3->text().toUInt();
            break;
        case 0x34:
            f_angle = ui.Angle_4->text().toUInt();
            break;
        case 0x35:
            f_angle = ui.Angle_5->text().toUInt();
            break;
        case 0x36:
            f_angle = ui.Angle_6->text().toUInt();
            break;
        case 0x37:
            f_angle = ui.Angle_7->text().toUInt();
            break;
        case 0x38:
            f_angle = ui.Angle_8->text().toUInt();
            break;
        default:
                break;
        }
        send_buf.append(f_angle&0xff);
        send_buf.append((f_angle>>8)&0xff);
        send_buf.append((f_angle>>16)&0xff);
        send_buf.append((f_angle>>24)&0xff);
        crc=calcrc((const unsigned char*)send_buf.data(),send_buf.length());
        send_buf.append((crc>>8)&0xff);
        send_buf.append(crc&0xff);

        myserial->write(send_buf);
    }
}

#define ONE_PACKET  512 //256
void Line::Receive_Data()
{
    int i;
    unsigned int int_val;
    float f_val;
    char *p_f;
    //QString str;
    QByteArray tt;
    QString send_buf;
    unsigned char message_type=0;
    QTextCodec* gb2312Codec = QTextCodec::codecForName("gb2312");
    char buf[16];

    static char recv_buffer[512];
    static int recv_datalen = 0;


    if(myserial && myserial->isOpen())
    {
        tt = myserial->readAll();                
        q = q+tt;

        if(tt.isEmpty())
        {

        }
        else
        {
            if( timer_id_searil != 0)
            {
                killTimer(timer_id_searil);
            }
            timer_id_searil = startTimer(50);
            return;
        }
        //qDebug("avans received: %x", str2));
    }

    {
        if(recv_datalen == 0)
        {
            if(q.isEmpty())
            {
                return;
            }

            if((q.at(0)==0x39) && (q.at(1)==0x01)) //远程标定
            {
                memcpy(recv_buffer+recv_datalen, q.data(), q.length());
                recv_datalen += q.length();
                qDebug("avans 111 received: %d", q.length());

                if(recv_datalen >= 64){
                    q.clear();
                    QByteArray q1(recv_buffer, 64);
                    q.append(q1);
                    recv_datalen=0;

                }else{

                      q.clear();
                    return;
                }
            }
        }else{
            memcpy(recv_buffer+recv_datalen, q.data(), q.length());
            recv_datalen += q.length();
            qDebug("avans 222 received: %d", q.length());

            if(recv_datalen >= 64){
                q.clear();
                QByteArray q1(recv_buffer, 64);
                q.append(q1);
                recv_datalen=0;

            }else{
                  q.clear();
                return;
            }
        }



    }


    if (q.count())
    {
   #if 0
        if(q.count()<2 || q.at(q.count()-1)!=0x0a || q.at(q.count()-2)!=0x0d)
        {
            if(q.count()>=8)
            {
                if(q.at(0)>=0x11 && q.at(0)<=0x1F && q.at(1)==0x03)
                {
                    Simulation_OilUnloadSend(q);
                    q.clear();
                }
                else if(q.at(0)>=0x30 && q.at(0)<=0x3F && q.at(1)==0x03)
                {
                    Simulation_AngleSend(q);
                    q.clear();
                }
                if(q.size()>200)
                    q.clear();
            }
            return;
        }
#endif
        //str = QString::fromUtf8("RX: ");
        QDateTime current_date_time = QDateTime::currentDateTime();
        QString str = current_date_time.toString("yyyy-MM-dd hh:mm:ss.zzz ");
        str.append("RX : ");

 #if 0
        for (i = 0; i < q.count(); ++i)
        {
            int_val = q.at(i);

            int_val &= 0xff;
            keyvalue[i] = int_val;
            /*if (i && (i % 32 == 0))
             *
            {
                sprintf(buf, "\n%c", int_val);
            }
            else*/
            {
                sprintf(buf, "%c", int_val);
            }
            str.append(buf);
        }
        recvflag = q.count();
#else
        str.append(q.toHex().toUpper());
#endif
       // QByteArray m_array = str.toLatin1().data();
       // str = QString::fromLocal8Bit(m_array);
        ui.textEdit->append(str);
        //qDebug("111 %d , %d, %d ", q.count(), q.length(), q.size());

        if(q.at(0)==':')
        {
            uint32_t regName;
            uint32_t regNum;
            uint8_t q8,q9;
            QDateTime q_datetime;
            QDate q_date;
            QTime q_time;


            q=q.remove(0,1);
            q=q.fromHex(q);
            if(q.length()>10)
            {
                if((q.at(0)==0x39) && (q.at(1)==0x01)) //远程标定
                {
                    if(((unsigned char)q.at(2)==0x95) && (q.at(3)==0x50)) //
                    {
                        message_type = 1;  //采集器
                    }
                    else
                    {
                        message_type = 2;  //控制器
                    }
                }
                q8 = q.at(8);
                q9 = q.at(9);
                regName = (unsigned int)q8*256+(unsigned int)q9;
            }
            else
            {
                regName=0;
            }
            if(message_type==2)
            switch(regName)
            {
                case 0x00A4:
                    tt.clear();
                    tt.append(q.at(16));
                    ui.StoreNum->setText(QString(tt.toHex()));
                    tt.clear();
                    tt.append(q.at(17));
                    ui.ManHoleCoverNum->setText(QString(tt.toHex(q.at(17))));
                    tt.clear();
                    tt.append(q.at(18));
                    ui.ManHoleSmallCoverNum->setText(QString(tt.toHex(q.at(18))));
                    tt.clear();
                    tt.append(q.at(20));
                    ui.BottonValveNum->setText(QString(tt.toHex(q.at(20))));
                    tt.clear();
                    tt.append(q.at(19));
                    ui.OilUnloadingValveNum->setText(QString(tt.toHex(q.at(19))));
                    break;
                case 0x01cc:

                    q_date.setDate(2000+q.at(16),q.at(17),q.at(18));
                    q_datetime.setDate(q_date);
                    q_time.setHMS(q.at(19),q.at(20),q.at(21));
                    q_datetime.setTime(q_time);
                    ui.controldateTime->setDateTime(q_datetime);
                    break;
                case 0x0024:
                    int_val = (unsigned char)q.at(16);
                    int_val = int_val*256+(unsigned char)q.at(17);
                    ui.AutoSealTime->setText(QString::number(int_val));
                    break;
                case 0x4000:
                    if(q.at(16)&0x80)
                    {
                        ui.Level->setCheckState(Qt::CheckState::Checked);
                    }
                    else
                    {
                        ui.Level->setCheckState(Qt::CheckState::Unchecked);
                    }
                    if(q.at(16)&0x40)
                    {
                        ui.Pressure->setCheckState(Qt::CheckState::Checked);
                    }
                    else
                    {
                        ui.Pressure->setCheckState(Qt::CheckState::Unchecked);
                    }
                    if(q.at(16)&0x20)
                    {
                        ui.PoweroffSave->setCheckState(Qt::CheckState::Checked);
                    }
                    else
                    {
                        ui.PoweroffSave->setCheckState(Qt::CheckState::Unchecked);
                    }
                    if(q.at(16)&0x10)
                    {
                        ui.DoubleOil->setCheckState(Qt::CheckState::Checked);
                    }
                    else
                    {
                        ui.DoubleOil->setCheckState(Qt::CheckState::Unchecked);
                    }
                    if(q.at(16)&0x8)
                    {
                        ui.ReSeal->setCheckState(Qt::CheckState::Checked);
                    }
                    else
                    {
                        ui.ReSeal->setCheckState(Qt::CheckState::Unchecked);
                    }
                    if(q.at(16)&0x4)
                    {
                        ui.lcd5->setCheckState(Qt::CheckState::Checked);
                    }
                    else
                    {
                        ui.lcd5->setCheckState(Qt::CheckState::Unchecked);
                    }
                    if(q.at(16)&0x2)
                    {
                        ui.Reserved->setCheckState(Qt::CheckState::Checked);
                    }
                    else
                    {
                        ui.Reserved->setCheckState(Qt::CheckState::Unchecked);
                    }
                    if(q.at(16)&0x1)
                    {
                        ui.AutoSeal->setCheckState(Qt::CheckState::Checked);
                    }
                    else
                    {
                        ui.AutoSeal->setCheckState(Qt::CheckState::Unchecked);
                    }
                    break;
            case 0x00E4:
                p_f = (char *)&f_val;
                for(i=0;i<4;++i)
                {
                    p_f[i] = q.at(19-i);
                }
                ui.CoefExp1->setText(QString::number(f_val));
                for(i=0;i<4;++i)
                {
                    p_f[i] = q.at(23-i);
                }
                ui.CoefExp2->setText(QString::number(f_val));
                for(i=0;i<4;++i)
                {
                    p_f[i] = q.at(27-i);
                }
                ui.CoefExp3->setText(QString::number(f_val));
                for(i=0;i<4;++i)
                {
                    p_f[i] = q.at(31-i);
                }
                ui.CoefExp4->setText(QString::number(f_val));
                for(i=0;i<4;++i)
                {
                    p_f[i] = q.at(35-i);
                }
                ui.CoefExp5->setText(QString::number(f_val));
                for(i=0;i<4;++i)
                {
                    p_f[i] = q.at(39-i);
                }
                ui.CoefExp6->setText(QString::number(f_val));
                for(i=0;i<4;++i)
                {
                    p_f[i] = q.at(43-i);
                }
                ui.CoefExp7->setText(QString::number(f_val));
                for(i=0;i<4;++i)
                {
                    p_f[i] = q.at(47-i);
                }
                ui.CoefExp8->setText(QString::number(f_val));
                break;
            case 0x0220:
                p_f = (char *)&int_val;
                send_buf.clear();
                for(int j=0;j<8;++j)
                {
                    for(i=0;i<4;++i)
                    {
                        p_f[i] = q.at(19+j*4-i);
                    }
                    send_buf += QString("%1.").arg(int_val);
                }
                ui.ControlSoftVersion->setText(send_buf);
                break;
            case 0x318:
                p_f = (char *)&f_val;
                for(i=0;i<4;++i)
                {
                    p_f[i] = q.at(19-i);
                }
                ui.Uart1_TimeOut->setText(QString::number(f_val));
                break;
            case 0x31c:
                if(q.at(16))
                {
                    ui.TankCapicity->setCheckState(Qt::CheckState::Checked);
                }
                else
                {
                    ui.TankCapicity->setCheckState(Qt::CheckState::Unchecked);
                }
                break;
            case 0x7A4:
                if(q.at(16))
                {
                    ui.EnableBlankSeal->setCheckState(Qt::CheckState::Checked);
                }
                else
                {
                    ui.EnableBlankSeal->setCheckState(Qt::CheckState::Unchecked);
                }
                break;
            default:
                    break;
            }

            if(message_type==1)
            {
                switch(regName)
                {
                case 0x0072:
                    int_val=0;
                    p_f = (char *)&int_val;
                    for(i=0;i<2;++i)
                    {
                        p_f[i] = q.at(17-i);
                    }
                    ui.CJManHoleCoverThreshold->setText(QString::number(int_val));
                    break;
                case 0x0074:
                    tt.clear();
                    tt.append(q.at(16));
                    ui.CJStoreNum->setText(QString(tt.toHex()));
                    tt.clear();
                    tt.append(q.at(17));
                    ui.CJManHoleCoverNum->setText(QString(tt.toHex(q.at(17))));
                    tt.clear();
                    tt.append(q.at(18));
                    ui.CJManHoleSmallCoverNum->setText(QString(tt.toHex(q.at(18))));
                    tt.clear();
                    tt.append(q.at(20));
                    ui.CJBottonValveNum->setText(QString(tt.toHex(q.at(20))));
                    tt.clear();
                    tt.append(q.at(19));
                    ui.CJOilUnloadingValveNum->setText(QString(tt.toHex(q.at(19))));
                    break;
                case 0x0075:
                   ui.CJManHoleCoverType->setCurrentIndex(q.at(16));
                   tt.clear();
                   tt.append(q.at(17));
                   ui.CJManHoleCoverNum_1->setText(QString(tt.toHex(q.at(17))));
                   tt.clear();
                   tt.append(q.at(18));
                   ui.CJManHoleCoverNum_2->setText(QString(tt.toHex(q.at(18))));
                   tt.clear();
                   tt.append(q.at(19));
                   ui.CJManHoleCoverNum_3->setText(QString(tt.toHex(q.at(19))));
                   tt.clear();
                   tt.append(q.at(20));
                   ui.CJManHoleCoverNum_4->setText(QString(tt.toHex(q.at(20))));
                   tt.clear();
                   tt.append(q.at(21));
                   ui.CJManHoleCoverNum_5->setText(QString(tt.toHex(q.at(21))));
                   tt.clear();
                   tt.append(q.at(22));
                   ui.CJManHoleCoverNum_6->setText(QString(tt.toHex(q.at(22))));
                   tt.clear();
                   tt.append(q.at(23));
                   ui.CJManHoleCoverNum_7->setText(QString(tt.toHex(q.at(23))));
                   tt.clear();
                   tt.append(q.at(24));
                   ui.CJManHoleCoverNum_8->setText(QString(tt.toHex(q.at(24))));
                   break;
                 case 0x0076:
                    ui.OilUnloadType->setCurrentIndex(q.at(16));
                    tt.clear();
                    tt.append(q.at(17));
                    ui.CJOilUnloadingValveNum_1->setText(QString(tt.toHex(q.at(17))));
                    tt.clear();
                    tt.append(q.at(18));
                    ui.CJOilUnloadingValveNum_2->setText(QString(tt.toHex(q.at(18))));
                    tt.clear();
                    tt.append(q.at(19));
                    ui.CJOilUnloadingValveNum_3->setText(QString(tt.toHex(q.at(19))));
                    tt.clear();
                    tt.append(q.at(20));
                    ui.CJOilUnloadingValveNum_4->setText(QString(tt.toHex(q.at(20))));
                    tt.clear();
                    tt.append(q.at(21));
                    ui.CJOilUnloadingValveNum_5->setText(QString(tt.toHex(q.at(21))));
                    tt.clear();
                    tt.append(q.at(22));
                    ui.CJOilUnloadingValveNum_6->setText(QString(tt.toHex(q.at(22))));
                    tt.clear();
                    tt.append(q.at(23));
                    ui.CJOilUnloadingValveNum_7->setText(QString(tt.toHex(q.at(23))));
                    tt.clear();
                    tt.append(q.at(24));
                    ui.CJOilUnloadingValveNum_8->setText(QString(tt.toHex(q.at(24))));
                    break;
                case 0x0077:

                   ui.CJBottonValveType->setCurrentIndex(q.at(16));
                   tt.clear();
                   tt.append(q.at(17));
                   ui.CJBottomValveNum_1->setText(QString(tt.toHex(q.at(17))));
                   tt.clear();
                   tt.append(q.at(18));
                   ui.CJBottomValveNum_2->setText(QString(tt.toHex(q.at(18))));
                   tt.clear();
                   tt.append(q.at(19));
                   ui.CJBottomValveNum_3->setText(QString(tt.toHex(q.at(19))));
                   tt.clear();
                   tt.append(q.at(20));
                   ui.CJBottomValveNum_4->setText(QString(tt.toHex(q.at(20))));
                   tt.clear();
                   tt.append(q.at(21));
                   ui.CJBottomValveNum_5->setText(QString(tt.toHex(q.at(21))));
                   tt.clear();
                   tt.append(q.at(22));
                   ui.CJBottomValveNum_6->setText(QString(tt.toHex(q.at(22))));
                   tt.clear();
                   tt.append(q.at(23));
                   ui.CJBottomValveNum_7->setText(QString(tt.toHex(q.at(23))));
                   tt.clear();
                   tt.append(q.at(24));
                   ui.CJBottomValveNum_8->setText(QString(tt.toHex(q.at(24))));
                   break;
                   case 0x0078:
                    ui.CJLevelType->setCurrentIndex(q.at(17));
                    break;
                case 0x0079:
                 ui.CJAttitudeType->setCurrentIndex(q.at(17));
                 break;
                    case 0x007A:
                        ui.CJTemperatureType->setCurrentIndex(q.at(16));
                    break;
                   case 0x017e:
                    tt.clear();
                    int_val = q.at(20)*256+q.at(21);
                    if(int_val+22>q.size())
                    {
                        int_val = q.size()-22;
                    }
                    for(i=0;i<int_val;++i)
                    {
                        tt.append(q.at(22+i));
                    }
                    ui.CJTransparentRx->setText(QString(tt.toHex()));
                    break;
                   case 0x0190:
                    if(q.size()>19)
                    {
                        ((char *)&f_val)[0] = q.at(19);
                        ((char *)&f_val)[1] = q.at(18);
                        ((char *)&f_val)[2] = q.at(17);
                        ((char *)&f_val)[3] = q.at(16);
                        ui.CJLevelZero_1->setText(QString("%1").arg(f_val));
                    }
                    if(q.size()>23)
                    {
                        ((char *)&f_val)[0] = q.at(23);
                        ((char *)&f_val)[1] = q.at(22);
                        ((char *)&f_val)[2] = q.at(21);
                        ((char *)&f_val)[3] = q.at(20);
                        ui.CJLevelZero_2->setText(QString("%1").arg(f_val));
                    }
                    if(q.size()>27)
                    {
                        ((char *)&f_val)[0] = q.at(27);
                        ((char *)&f_val)[1] = q.at(26);
                        ((char *)&f_val)[2] = q.at(25);
                        ((char *)&f_val)[3] = q.at(24);
                        ui.CJLevelZero_3->setText(QString("%1").arg(f_val));
                    }
                    if(q.size()>31)
                    {
                        ((char *)&f_val)[0] = q.at(31);
                        ((char *)&f_val)[1] = q.at(30);
                        ((char *)&f_val)[2] = q.at(29);
                        ((char *)&f_val)[3] = q.at(28);
                        ui.CJLevelZero_4->setText(QString("%1").arg(f_val));
                    }
                    break;
                   default:
                    break;
                }
             }
        }
        else
        {
            QString m_String(q);
            if(m_String.contains(QString("file="))==true)
            {
                QString m_packet=m_String.section(QString("file="),1);
                qDebug("%s",m_packet.data());
                packetno=m_packet.toInt();
                down=2;
                sendflag=1;
                if((s.size()/ONE_PACKET)<packetno)
                {
                    down=3;
                    sendflag=1;
                    ui.textEdit->clear();
                    ui.textEdit->append("file down load ok");
                }
               // xmodemTransmit((unsigned char*)s.data(), s.length());
            }
            else if(m_String.contains(QString("acknowlege"))==true)
            {
                QString m_packet=m_String.section(QString("acknowlege="),1);
                //qDebug("%s",m_packet.data());
                if(ui.textEdit->toPlainText().size()>4096)
                    ui.textEdit->clear();
                packetno=m_packet.toInt();
                if((s.size()/ONE_PACKET)<packetno)
                {
                    down=3;
                    sendflag=1;
                    ui.textEdit->clear();
                    ui.textEdit->append("file down load ok");
                }
                else
                    sendflag=1;
               // xmodemTransmit((unsigned char*)s.data(), s.length());
            }else{
                qDebug("enter avnas:");
                uint32_t regName;
                uint32_t regNum;
                uint8_t q8,q9;
                QDateTime q_datetime;
                QDate q_date;
                QTime q_time;
                //qDebug("enter avnas111:q.length = %d", q.length());
                //q=q.fromHex(q);
                 qDebug("enter avnas:q.length = %d", q.length());
                if(q.length()>10)
                {
                      qDebug("enter avnas111: q[0] = %x q[1] = %x", q.at(0), q.at(1));
                    if((q.at(0)==0x39) && (q.at(1)==0x01)) //远程标定
                    {
                        qDebug("enter avnas111:");
                        if(((unsigned char)q.at(2)==0x95) && (q.at(3)==0x50)) //
                        {
                            message_type = 1;  //采集器
                        }
                        else
                        {
                            message_type = 2;  //控制器
                        }
                    }
                    q8 = q.at(8);
                    q9 = q.at(9);
                    regName = (unsigned int)q8*256+(unsigned int)q9;
                }
                else
                {
                    regName=0;
                }
                if(message_type==2)
                switch(regName)
                {
                    case 0x00A4:
                        tt.clear();
                        tt.append(q.at(16));
                        ui.StoreNum->setText(QString(tt.toHex()));
                        tt.clear();
                        tt.append(q.at(17));
                        ui.ManHoleCoverNum->setText(QString(tt.toHex(q.at(17))));
                        tt.clear();
                        tt.append(q.at(18));
                        ui.ManHoleSmallCoverNum->setText(QString(tt.toHex(q.at(18))));
                        tt.clear();
                        tt.append(q.at(20));
                        ui.BottonValveNum->setText(QString(tt.toHex(q.at(20))));
                        tt.clear();
                        tt.append(q.at(19));
                        ui.OilUnloadingValveNum->setText(QString(tt.toHex(q.at(19))));
                        break;
                    case 0x01cc:

                        q_date.setDate(2000+q.at(16),q.at(17),q.at(18));
                        q_datetime.setDate(q_date);
                        q_time.setHMS(q.at(19),q.at(20),q.at(21));
                        q_datetime.setTime(q_time);
                        ui.controldateTime->setDateTime(q_datetime);
                        break;
                    case 0x0024:
                        int_val = (unsigned char)q.at(16);
                        int_val = int_val*256+(unsigned char)q.at(17);
                        ui.AutoSealTime->setText(QString::number(int_val));
                        break;
                    case 0x4000:
                        if(q.at(16)&0x80)
                        {
                            ui.Level->setCheckState(Qt::CheckState::Checked);
                        }
                        else
                        {
                            ui.Level->setCheckState(Qt::CheckState::Unchecked);
                        }
                        if(q.at(16)&0x40)
                        {
                            ui.Pressure->setCheckState(Qt::CheckState::Checked);
                        }
                        else
                        {
                            ui.Pressure->setCheckState(Qt::CheckState::Unchecked);
                        }
                        if(q.at(16)&0x20)
                        {
                            ui.PoweroffSave->setCheckState(Qt::CheckState::Checked);
                        }
                        else
                        {
                            ui.PoweroffSave->setCheckState(Qt::CheckState::Unchecked);
                        }
                        if(q.at(16)&0x10)
                        {
                            ui.DoubleOil->setCheckState(Qt::CheckState::Checked);
                        }
                        else
                        {
                            ui.DoubleOil->setCheckState(Qt::CheckState::Unchecked);
                        }
                        if(q.at(16)&0x8)
                        {
                            ui.ReSeal->setCheckState(Qt::CheckState::Checked);
                        }
                        else
                        {
                            ui.ReSeal->setCheckState(Qt::CheckState::Unchecked);
                        }
                        if(q.at(16)&0x4)
                        {
                            ui.lcd5->setCheckState(Qt::CheckState::Checked);
                        }
                        else
                        {
                            ui.lcd5->setCheckState(Qt::CheckState::Unchecked);
                        }
                        if(q.at(16)&0x2)
                        {
                            ui.Reserved->setCheckState(Qt::CheckState::Checked);
                        }
                        else
                        {
                            ui.Reserved->setCheckState(Qt::CheckState::Unchecked);
                        }
                        if(q.at(16)&0x1)
                        {
                            ui.AutoSeal->setCheckState(Qt::CheckState::Checked);
                        }
                        else
                        {
                            ui.AutoSeal->setCheckState(Qt::CheckState::Unchecked);
                        }
                        break;
                case 0x00E4:
                    p_f = (char *)&f_val;
                    for(i=0;i<4;++i)
                    {
                        p_f[i] = q.at(19-i);
                    }
                    ui.CoefExp1->setText(QString::number(f_val));
                    for(i=0;i<4;++i)
                    {
                        p_f[i] = q.at(23-i);
                    }
                    ui.CoefExp2->setText(QString::number(f_val));
                    for(i=0;i<4;++i)
                    {
                        p_f[i] = q.at(27-i);
                    }
                    ui.CoefExp3->setText(QString::number(f_val));
                    for(i=0;i<4;++i)
                    {
                        p_f[i] = q.at(31-i);
                    }
                    ui.CoefExp4->setText(QString::number(f_val));
                    for(i=0;i<4;++i)
                    {
                        p_f[i] = q.at(35-i);
                    }
                    ui.CoefExp5->setText(QString::number(f_val));
                    for(i=0;i<4;++i)
                    {
                        p_f[i] = q.at(39-i);
                    }
                    ui.CoefExp6->setText(QString::number(f_val));
                    for(i=0;i<4;++i)
                    {
                        p_f[i] = q.at(43-i);
                    }
                    ui.CoefExp7->setText(QString::number(f_val));
                    for(i=0;i<4;++i)
                    {
                        p_f[i] = q.at(47-i);
                    }
                    ui.CoefExp8->setText(QString::number(f_val));
                    break;
                case 0x0220:
                    p_f = (char *)&int_val;
                    send_buf.clear();
                    for(int j=0;j<8;++j)
                    {
                        for(i=0;i<4;++i)
                        {
                            p_f[i] = q.at(19+j*4-i);
                        }
                        send_buf += QString("%1.").arg(int_val);
                    }
                    ui.ControlSoftVersion->setText(send_buf);
                    break;
                case 0x318:
                    p_f = (char *)&f_val;
                    for(i=0;i<4;++i)
                    {
                        p_f[i] = q.at(19-i);
                    }
                    ui.Uart1_TimeOut->setText(QString::number(f_val));
                    break;
                case 0x31c:
                    if(q.at(16))
                    {
                        ui.TankCapicity->setCheckState(Qt::CheckState::Checked);
                    }
                    else
                    {
                        ui.TankCapicity->setCheckState(Qt::CheckState::Unchecked);
                    }
                    break;
                case 0x7A4:
                    if(q.at(16))
                    {
                        ui.EnableBlankSeal->setCheckState(Qt::CheckState::Checked);
                    }
                    else
                    {
                        ui.EnableBlankSeal->setCheckState(Qt::CheckState::Unchecked);
                    }
                    break;
                default:
                        break;
                }

                if(message_type==1)
                {
                    qDebug("enter avnas: collector ");
                    switch(regName)
                    {
                    case 0x0220:
                        {
                        p_f = (char *)&int_val;
                        send_buf.clear();
                        send_buf += "V";
                        for(int j=0;j<8;++j)
                        {
                            for(i=0;i<4;++i)
                            {
                                p_f[i] = q.at(19+j*4-i);
                            }
                            //int_val = ntohl(int_val);
                            send_buf += QString("%1.").arg(int_val);
                        }
                        //ui.ControlSoftVersion->setText(send_buf);
                        ui.CJlabel_version->setText(send_buf);
                        }
                        break;
                    case 0x0072:
                        int_val=0;
                        p_f = (char *)&int_val;
                        for(i=0;i<2;++i)
                        {
                            p_f[i] = q.at(17-i);
                        }
                        ui.CJManHoleCoverThreshold->setText(QString::number(int_val));
                        break;
                    case 0x0074:
                        tt.clear();
                        tt.append(q.at(16));
                        ui.CJStoreNum->setText(QString(tt.toHex()));
                        tt.clear();
                        tt.append(q.at(17));
                        ui.CJManHoleCoverNum->setText(QString(tt.toHex(q.at(17))));
                        tt.clear();
                        tt.append(q.at(18));
                        ui.CJManHoleSmallCoverNum->setText(QString(tt.toHex(q.at(18))));
                        tt.clear();
                        tt.append(q.at(20));
                        ui.CJBottonValveNum->setText(QString(tt.toHex(q.at(20))));
                        tt.clear();
                        tt.append(q.at(19));
                        ui.CJOilUnloadingValveNum->setText(QString(tt.toHex(q.at(19))));
                        break;
                    case 0x0075:
                       ui.CJManHoleCoverType->setCurrentIndex(q.at(16));
                       tt.clear();
                       tt.append(q.at(17));
                       ui.CJManHoleCoverNum_1->setText(QString(tt.toHex(q.at(17))));
                       tt.clear();
                       tt.append(q.at(18));
                       ui.CJManHoleCoverNum_2->setText(QString(tt.toHex(q.at(18))));
                       tt.clear();
                       tt.append(q.at(19));
                       ui.CJManHoleCoverNum_3->setText(QString(tt.toHex(q.at(19))));
                       tt.clear();
                       tt.append(q.at(20));
                       ui.CJManHoleCoverNum_4->setText(QString(tt.toHex(q.at(20))));
                       tt.clear();
                       tt.append(q.at(21));
                       ui.CJManHoleCoverNum_5->setText(QString(tt.toHex(q.at(21))));
                       tt.clear();
                       tt.append(q.at(22));
                       ui.CJManHoleCoverNum_6->setText(QString(tt.toHex(q.at(22))));
                       tt.clear();
                       tt.append(q.at(23));
                       ui.CJManHoleCoverNum_7->setText(QString(tt.toHex(q.at(23))));
                       tt.clear();
                       tt.append(q.at(24));
                       ui.CJManHoleCoverNum_8->setText(QString(tt.toHex(q.at(24))));
                       break;
                     case 0x0076:
                        ui.OilUnloadType->setCurrentIndex(q.at(16));
                        tt.clear();
                        tt.append(q.at(17));
                        ui.CJOilUnloadingValveNum_1->setText(QString(tt.toHex(q.at(17))));
                        tt.clear();
                        tt.append(q.at(18));
                        ui.CJOilUnloadingValveNum_2->setText(QString(tt.toHex(q.at(18))));
                        tt.clear();
                        tt.append(q.at(19));
                        ui.CJOilUnloadingValveNum_3->setText(QString(tt.toHex(q.at(19))));
                        tt.clear();
                        tt.append(q.at(20));
                        ui.CJOilUnloadingValveNum_4->setText(QString(tt.toHex(q.at(20))));
                        tt.clear();
                        tt.append(q.at(21));
                        ui.CJOilUnloadingValveNum_5->setText(QString(tt.toHex(q.at(21))));
                        tt.clear();
                        tt.append(q.at(22));
                        ui.CJOilUnloadingValveNum_6->setText(QString(tt.toHex(q.at(22))));
                        tt.clear();
                        tt.append(q.at(23));
                        ui.CJOilUnloadingValveNum_7->setText(QString(tt.toHex(q.at(23))));
                        tt.clear();
                        tt.append(q.at(24));
                        ui.CJOilUnloadingValveNum_8->setText(QString(tt.toHex(q.at(24))));
                        break;
                    case 0x0077:

                       ui.CJBottonValveType->setCurrentIndex(q.at(16));
                       tt.clear();
                       tt.append(q.at(17));
                       ui.CJBottomValveNum_1->setText(QString(tt.toHex(q.at(17))));
                       tt.clear();
                       tt.append(q.at(18));
                       ui.CJBottomValveNum_2->setText(QString(tt.toHex(q.at(18))));
                       tt.clear();
                       tt.append(q.at(19));
                       ui.CJBottomValveNum_3->setText(QString(tt.toHex(q.at(19))));
                       tt.clear();
                       tt.append(q.at(20));
                       ui.CJBottomValveNum_4->setText(QString(tt.toHex(q.at(20))));
                       tt.clear();
                       tt.append(q.at(21));
                       ui.CJBottomValveNum_5->setText(QString(tt.toHex(q.at(21))));
                       tt.clear();
                       tt.append(q.at(22));
                       ui.CJBottomValveNum_6->setText(QString(tt.toHex(q.at(22))));
                       tt.clear();
                       tt.append(q.at(23));
                       ui.CJBottomValveNum_7->setText(QString(tt.toHex(q.at(23))));
                       tt.clear();
                       tt.append(q.at(24));
                       ui.CJBottomValveNum_8->setText(QString(tt.toHex(q.at(24))));
                       break;
                       case 0x0078:
                        ui.CJLevelType->setCurrentIndex(q.at(17));
                        break;
                    case 0x0079:
                     ui.CJAttitudeType->setCurrentIndex(q.at(17));
                     break;
                        case 0x007A:
                            ui.CJTemperatureType->setCurrentIndex(q.at(16));
                        break;
                       case 0x017e:
                        tt.clear();
                        int_val = q.at(20)*256+q.at(21);
                        if(int_val+22>q.size())
                        {
                            int_val = q.size()-22;
                        }
                        for(i=0;i<int_val;++i)
                        {
                            tt.append(q.at(22+i));
                        }
                        ui.CJTransparentRx->setText(QString(tt.toHex()));
                        break;
                       case 0x0190:
                        if(q.size()>19)
                        {
                            ((char *)&f_val)[0] = q.at(19);
                            ((char *)&f_val)[1] = q.at(18);
                            ((char *)&f_val)[2] = q.at(17);
                            ((char *)&f_val)[3] = q.at(16);
                            ui.CJLevelZero_1->setText(QString("%1").arg(f_val));
                        }
                        if(q.size()>23)
                        {
                            ((char *)&f_val)[0] = q.at(23);
                            ((char *)&f_val)[1] = q.at(22);
                            ((char *)&f_val)[2] = q.at(21);
                            ((char *)&f_val)[3] = q.at(20);
                            ui.CJLevelZero_2->setText(QString("%1").arg(f_val));
                        }
                        if(q.size()>27)
                        {
                            ((char *)&f_val)[0] = q.at(27);
                            ((char *)&f_val)[1] = q.at(26);
                            ((char *)&f_val)[2] = q.at(25);
                            ((char *)&f_val)[3] = q.at(24);
                            ui.CJLevelZero_3->setText(QString("%1").arg(f_val));
                        }
                        if(q.size()>31)
                        {
                            ((char *)&f_val)[0] = q.at(31);
                            ((char *)&f_val)[1] = q.at(30);
                            ((char *)&f_val)[2] = q.at(29);
                            ((char *)&f_val)[3] = q.at(28);
                            ui.CJLevelZero_4->setText(QString("%1").arg(f_val));
                        }
                        break;
                       default:
                        break;
                    }
                 }
            }
            //qDebug("%s",m_String.data());
        }
        //qDebug("%s",q.data());
        q.clear();
    }
}

void Line::downfile()
{
	if (!myserial->isOpen())
	{
		return;
	}
	if (s.length() == 0)
		return;
    /*myserial->close();
	myserial->setPortName(portui.comboBox->currentText());
	myserial->setBaudRate(115200, QSerialPort::AllDirections);
	myserial->setDataBits(QSerialPort::Data8);
	myserial->setParity(QSerialPort::NoParity);
	myserial->setStopBits(QSerialPort::OneStop);
	if (myserial->open(QIODevice::ReadWrite) == FALSE)
		qDebug("open error");
    else*/
	{
        connect(myserial,SIGNAL(readyRead()),this,SLOT(Receive_Data()));
		killTimer(timerid);
        timerid = startTimer(300);
        sendflag=1;
		down = 1;
		len = 0;
		retry = 0;
		packetno = 1;
	}
}
void Line::StopUpGrade()
{
    down=0;
    killTimer(timerid);
    timerid = startTimer(1000);
}
void Line::down_file()
{
	//xmodemTransmit((unsigned char*)s.data(), s.length());
//	timerid = startTimer(100);
}

void Line::portclose()
{
	if (myserial)
		myserial->close();
}

void Line::portclick()
{
	QString path = "HKEY_LOCAL_MACHINE\\HARDWARE\\DEVICEMAP\\SERIALCOMM\\";
	QSettings * settings = new QSettings(path, QSettings::NativeFormat);
	QStringList key = settings->allKeys();
	int num = (int)key.size();
	QString value;
	int j;
	j = portui.comboBox->currentIndex();
	portui.comboBox->clear();
	for (int i = 0; i<num; i++)
	{
		value = getcomm(i, "value");
		//for (j = 0; j < portui.comboBox->count(); ++j)
		//{
		//	if (portui.comboBox->itemText(j)==value)
		//	{
		//		break;
		//	}
		//}
		//if(j==portui.comboBox->count())
			portui.comboBox->addItem(value);
	}
	if (j >= portui.comboBox->count() || j<0)
		j = 0;
	portui.comboBox->setCurrentIndex(j);
	portdialog->show();
}


QString Line::getcomm(int index, QString keyorvalue)
{
	QString commresult;
	//int indexnum,keysize,valuesize;
	if (::RegOpenKeyEx(HKEY_LOCAL_MACHINE, TEXT("HARDWARE\\DEVICEMAP\\SERIALCOMM"), 0, KEY_READ, &hKey) != 0)
	{
		QString error = "Cannotopenregedit!";//无法打开注册表时返回error
		return error;
	}//if(::RegOpenKeyEx(HKEY_LOCAL_MACHINE,subkey,0,KEY_READ,&hKey)!=0)
	QString keymessage;//键名
	QString message;
	QString valuemessage;//键值
	indexnum = index;//要读取键值的索引号
	keysize = sizeof(keyname);
	valuesize = sizeof(keyvalue);
	if (::RegEnumValue(hKey, indexnum, keyname, (LPDWORD)&keysize, 0, &type, (BYTE*)keyvalue, &valuesize) == 0)//列举键名和值
	{
        for (DWORD i = 0; i<keysize; i++)
		{
			message = keyname[i];
			keymessage.append(message);
		}//for(inti=0;i<=keysize;i++)    读取键名
        for (DWORD j = 0; j<valuesize; j++)
		{
			if (keyvalue[j] != 0x00)
			{
				valuemessage.append(keyvalue[j]);
			}
		}//for(intj=0;j<valuesize;j++)读取键值
		if (keyorvalue == "key")
		{
			commresult = keymessage;
		}
		if (keyorvalue == "value")
		{
			commresult = valuemessage;
		}
	}
	else
	{
		commresult = "nokey";
	}//if(::RegEnumValue(hKey,indexnum,keyname,&keysize,0,&type,(BYTE*)keyvalue,&valuesize)==0)列举键名和值
	return commresult;
	::RegCloseKey(hKey);//关闭注册表
}
///*获取串口号相关


#define SOH 0x01
#define STX 0x02
#define EOT 0x04
#define ACK 0x06
#define NAK 0x15
#define CAN 0x18
#define CTRLZ 0x1A
#define DLY_1S 10
#define MAXRETRANS 200

static int last_error = 0;
void Line::out_buff(unsigned char *buff, int size)
{
    QByteArray send_buf;
    int crc;
	//QString send_buf;
	//send_buf = QString::fromLatin1((char *)buff, size);
	//q = send_buf.toLatin1();
    send_buf.append(0xA5);
    send_buf.append(0x5A);
    send_buf.append(0x55);
    send_buf.append(0xAA);
    crc=calcrc(buff,size);
    for(int i=0;i<size;++i)
    {
        send_buf.append(buff[i]);
    }
    send_buf.append(crc&0xff);
    send_buf.append((crc>>8)&0xff);
    send_buf.append(0xA5);
    send_buf.append(0x5A);
    send_buf.append(0x55);
    send_buf.append(0xAA);

    myserial->write(send_buf);
   // qDebug("%s",send_buf.toHex().data());
}

int Line::in_buff(unsigned char *buff, int time_out)
{
	int arg = 0;
	int qSize = 0;
	int readSize = 0;

	last_error = 0;
#if 0
	sysXmodemUartArg.timeout = time_out;

	if (RETURN_RESULT_ERROR_NOERR ==
		ctrlSysUart(uart, DEVICE_CONTROL_WAIT_EVENT, (UART_ARG)(&sysXmodemUartArg)))
	{
		qSize = uart->recvDQ.q.curSize;
		if (qSize > 0)
		{
			readSize = readSysUart(uart, buff, qSize, &arg);
		}
	}
#else
	//QByteArray q;
	//int retry=0;
	//do
	//{
	//	q=myserial->readAll();
	//	if (q.length())
	//	{
	//		memcpy(buff, q.data(), q.length());
	//		readSize = q.length();
	//		break;
	//	}
		readSize = myserial->read((char*)buff, 140);
		//if (readSize > 0)
		//	break;
	//	Sleep(100);
	//} while (++retry < time_out);
#endif
	if (readSize == 0)
		last_error = 1;

	return (readSize);
}

void InvertUint8(unsigned char *dBuf, unsigned char *srcBuf)
{
    int i;
    unsigned char tmp[4];
    tmp[0] = 0;
    for(i = 0; i < 8; i++)
    {
        if(srcBuf[0] & (1 << i))
            tmp[0] |= 1 << (7 - i);
    }
    dBuf[0] = tmp[0];
}

void InvertUint16(unsigned short *dBuf, unsigned short *srcBuf)
{
    int i;
    unsigned short tmp[4];
    tmp[0] = 0;
    for (i = 0; i < 16; i++)
    {
        if(srcBuf[0] & (1 << i))
            tmp[0] |= 1 << (15 - i);
    }
    dBuf[0] = tmp[0];
}
unsigned short CRC16_MODBUS(unsigned char *puchMsg, unsigned int usDataLen)
{
    int i;
      unsigned short temp;
      unsigned short temp1;
    unsigned short wCRCin = 0xFFFF;
    unsigned short wCPoly = 0x8005;
    unsigned char wChar = 0;
    while(usDataLen--)
    {
        wChar = *(puchMsg++);
        InvertUint8(&wChar, &wChar);
        wCRCin ^= (wChar << 8);
        for(i = 0; i < 8; i++)
        {
            if(wCRCin & 0x8000)
                wCRCin = (wCRCin << 1)^wCPoly;
            else
                wCRCin = wCRCin << 1;
        }
    }
    InvertUint16(&wCRCin, &wCRCin);
        temp1=wCRCin>>8&0x00ff;
        temp=(temp1)+(wCRCin<<8);
    return(temp);
}
int Line::calcrc(const unsigned char *ptr, int count)
{
    unsigned short crc;
    crc=CRC16_MODBUS((unsigned char *)ptr,count);

	return (crc);
}
int Line::check(int crc, const unsigned char *buf, int sz)
{
	if (crc)
	{
		unsigned short crc = calcrc(buf, sz);
		unsigned short tcrc = (buf[sz] << 8) + buf[sz + 1];

		if (crc == tcrc)
			return 1;
	}
	else
	{
		int i = 0;
		unsigned char cks = 0;

		for (i = 0; i < sz; i++)
		{
			cks += buf[i];
		}

		if (cks == buf[sz])
			return 1;
	}

	return 0;

}

//send_buff_size == 140
int Line::xmodemTransmit(unsigned char *src, int srcsz)
{
    unsigned char xbuff[1024];
	int bufsz = 0;
	
	//unsigned char packetno = 1;
	int i = 0;
	int c = 0;
	QString out_mess;
	//int len = 0;
	//int retry = 0;

//	for (;;)
	{
//		for (retry = 0; retry < 16; ++retry)
		if(down==1)
		{
            QByteArray ba = QCryptographicHash::hash(s, QCryptographicHash::Md5);
            xbuff[0] = SOH;  //YmodemID
            xbuff[1] = 0;
            xbuff[2] = 1;  //packIndex
            xbuff[3] = (s.size()/ONE_PACKET) >> 8;
            xbuff[4] = (s.size()/ONE_PACKET)&0xff;  //packTotalNum
            out_mess = ui.FileNameEdit->text().section('/',-1);
            memset(xbuff+5,0,128);
            memcpy(xbuff+5,out_mess.toLatin1().data(),out_mess.size());
            xbuff[69]=s.size()>>24;
            xbuff[70]=s.size()>>16;
            xbuff[71]=s.size()>>8;
            xbuff[72]=s.size();
            memcpy(xbuff+73,ba.data(),16);
            out_buff(xbuff,133);
			retry++;
            if (retry>10)
			{
				out_mess = QString::fromLocal8Bit("超时，退出文件传输");
                down=0;
				return -2;
			}
		}
        else if(down==2)
		{
            start_trans:
                xbuff[0] = 2;  //YmodemID
                xbuff[1] = (packetno+1)/256;
                xbuff[2] = (packetno+1)&0xff;  //packIndex
                xbuff[3] = (s.size()/ONE_PACKET) >> 8;
                xbuff[4] = (s.size()/ONE_PACKET)&0xff;  //packTotalNum
                if(s.size()<(packetno+1)*ONE_PACKET)
                    bufsz=s.size()-(packetno)*ONE_PACKET;
                else
                    bufsz=ONE_PACKET;
                memcpy(xbuff+5,src+packetno*ONE_PACKET,bufsz);
                out_buff(xbuff,5+bufsz);
        }
        else if(down==3)
        {
            down=0;
            sendflag = 0;
            out_mess = QString::fromLocal8Bit("文件传输完成,等待重启完成升级工作");
            ui.textEdit->append(out_mess);
            xbuff[0] = 3;  //YmodemID
            xbuff[1] = 0;
            xbuff[2] = 1;  //packIndex
            xbuff[3] = (s.size()/ONE_PACKET) >> 8;
            xbuff[4] = (s.size()/ONE_PACKET)&0xff;  //packTotalNum
            out_mess = ui.FileNameEdit->text().section('/',-1);
            memset(xbuff+5,0,128);
            memcpy(xbuff+5,out_mess.toLatin1().data(),out_mess.size());
            xbuff[69]=s.size()>>24;
            xbuff[70]=s.size()>>16;
            xbuff[71]=s.size()>>8;
            xbuff[72]=s.size();
            out_buff(xbuff,133);
        }
	}
}

void Line::on_pushButton_clicked()
{
    ui.textEdit->clear();
}

void Line::on_pushButton_2_clicked()
{
    //ui.file_name_Edit
    QString fileName = QFileDialog::getOpenFileName(this, tr("选择文件"), "D:\\", tr("*.bin"));
    //int n;
    if (!fileName.isEmpty())
    {
        ui.file_name_Edit->setText(fileName);
    }

}

void Line::on_pushButton_md5_clicked()
{
    QString fileName = ui.file_name_Edit->text();
    file_md5(fileName);
    textEdit_append("文件转换完成\r\n");
}

void Line::on_pushButton_decode_clicked()
{
    QString in_frame = ui.textEdit_frame->toPlainText();
    QString out_frame;
    //in_frame.trimmed();    
    in_frame.replace("0X", "");
    in_frame.replace("0x", "");
    in_frame.replace("\t", "");
    in_frame.replace("\n", "");
    in_frame.replace(" ", "");

    out_frame.append("\r\n转换原始数据：\r\n");
    out_frame.append(in_frame);
    frame_decode_recognize(in_frame,&out_frame);
    textEdit_append(out_frame);
}

void Line::on_pushButton_A2HEX_clicked()
{
    QString in_frame = ui.textEdit_frame->toPlainText();
    QString out_frame;

    in_frame.replace("0X", "");
    in_frame.replace("0x", "");
    in_frame.replace("\t", "");
    in_frame.replace("\n", "");
    in_frame.replace(" ", "");

    out_frame.append("\r\n转换原始数据：\r\n");
    out_frame.append(in_frame);

    frame_to_ascii(in_frame,&out_frame);
    textEdit_append(out_frame);

}