123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135 |
- /* ----------------------------------------------------------------------
- * Project: CMSIS DSP Library
- * Title: arm_q31_to_q15.c
- * Description: Converts the elements of the Q31 vector to Q15 vector
- *
- * $Date: 18. March 2019
- * $Revision: V1.6.0
- *
- * Target Processor: Cortex-M cores
- * -------------------------------------------------------------------- */
- /*
- * Copyright (C) 2010-2019 ARM Limited or its affiliates. All rights reserved.
- *
- * SPDX-License-Identifier: Apache-2.0
- *
- * Licensed under the Apache License, Version 2.0 (the License); you may
- * not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an AS IS BASIS, WITHOUT
- * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
- #include "arm_math.h"
- /**
- @ingroup groupSupport
- */
- /**
- @addtogroup q31_to_x
- @{
- */
- /**
- @brief Converts the elements of the Q31 vector to Q15 vector.
- @param[in] pSrc points to the Q31 input vector
- @param[out] pDst points to the Q15 output vector
- @param[in] blockSize number of samples in each vector
- @return none
- @par Details
- The equation used for the conversion process is:
- <pre>
- pDst[n] = (q15_t) pSrc[n] >> 16; 0 <= n < blockSize.
- </pre>
- */
- void arm_q31_to_q15(
- const q31_t * pSrc,
- q15_t * pDst,
- uint32_t blockSize)
- {
- uint32_t blkCnt; /* Loop counter */
- const q31_t *pIn = pSrc; /* Source pointer */
- #if defined (ARM_MATH_LOOPUNROLL) && defined (ARM_MATH_DSP)
- q31_t in1, in2, in3, in4;
- q31_t out1, out2;
- #endif
- #if defined (ARM_MATH_LOOPUNROLL)
- /* Loop unrolling: Compute 4 outputs at a time */
- blkCnt = blockSize >> 2U;
- while (blkCnt > 0U)
- {
- /* C = (q15_t) (A >> 16) */
- /* Convert from q31 to q15 and store result in destination buffer */
- #if defined (ARM_MATH_DSP)
- in1 = *pIn++;
- in2 = *pIn++;
- in3 = *pIn++;
- in4 = *pIn++;
- /* pack two higher 16-bit values from two 32-bit values */
- #ifndef ARM_MATH_BIG_ENDIAN
- out1 = __PKHTB(in2, in1, 16);
- out2 = __PKHTB(in4, in3, 16);
- #else
- out1 = __PKHTB(in1, in2, 16);
- out2 = __PKHTB(in3, in4, 16);
- #endif /* #ifdef ARM_MATH_BIG_ENDIAN */
- write_q15x2_ia (&pDst, out1);
- write_q15x2_ia (&pDst, out2);
- #else
- *pDst++ = (q15_t) (*pIn++ >> 16);
- *pDst++ = (q15_t) (*pIn++ >> 16);
- *pDst++ = (q15_t) (*pIn++ >> 16);
- *pDst++ = (q15_t) (*pIn++ >> 16);
- #endif /* #if defined (ARM_MATH_DSP) */
- /* Decrement loop counter */
- blkCnt--;
- }
- /* Loop unrolling: Compute remaining outputs */
- blkCnt = blockSize % 0x4U;
- #else
- /* Initialize blkCnt with number of samples */
- blkCnt = blockSize;
- #endif /* #if defined (ARM_MATH_LOOPUNROLL) */
- while (blkCnt > 0U)
- {
- /* C = (q15_t) (A >> 16) */
- /* Convert from q31 to q15 and store result in destination buffer */
- *pDst++ = (q15_t) (*pIn++ >> 16);
- /* Decrement loop counter */
- blkCnt--;
- }
- }
- /**
- @} end of q31_to_x group
- */
|