BvAutoController/Device/gpio.c

/* Copyright Statement:
 *
 * This software/firmware and related documentation ("AutoChips Software") are
 * protected under relevant copyright laws. The information contained herein is
 * confidential and proprietary to AutoChips Inc. and/or its licensors. Without
 * the prior written permission of AutoChips inc. and/or its licensors, any
 * reproduction, modification, use or disclosure of AutoChips Software, and
 * information contained herein, in whole or in part, shall be strictly
 * prohibited.
 *
 * AutoChips Inc. (C) 2022. All rights reserved.
 *
 * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
 * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("AUTOCHIPS SOFTWARE")
 * RECEIVED FROM AUTOCHIPS AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER
 * ON AN "AS-IS" BASIS ONLY. AUTOCHIPS EXPRESSLY DISCLAIMS ANY AND ALL
 * WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
 * NONINFRINGEMENT. NEITHER DOES AUTOCHIPS PROVIDE ANY WARRANTY WHATSOEVER WITH
 * RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY,
 * INCORPORATED IN, OR SUPPLIED WITH THE AUTOCHIPS SOFTWARE, AND RECEIVER AGREES
 * TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO.
 * RECEIVER EXPRESSLY ACKNOWLEDGES THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO
 * OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES CONTAINED IN AUTOCHIPS
 * SOFTWARE. AUTOCHIPS SHALL ALSO NOT BE RESPONSIBLE FOR ANY AUTOCHIPS SOFTWARE
 * RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
 * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND AUTOCHIPS'S
 * ENTIRE AND CUMULATIVE LIABILITY WITH RESPECT TO THE AUTOCHIPS SOFTWARE
 * RELEASED HEREUNDER WILL BE, AT AUTOCHIPS'S OPTION, TO REVISE OR REPLACE THE
 * AUTOCHIPS SOFTWARE AT ISSUE, OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE
 * CHARGE PAID BY RECEIVER TO AUTOCHIPS FOR SUCH AUTOCHIPS SOFTWARE AT ISSUE.
 */
/******************************************************************************
 * @version: V2.0.1  AC7840x  Demo
 ******************************************************************************/

/*!
 * @file gpio.c
 *
 * @brief This file contains the user gpio function..
 */

/* ===========================================  Includes  =========================================== */
#include  "gpio.h"

/* ============================================  Define  ============================================ */


/* ===========================================  Typedef  ============================================ */


/* ==========================================  Variables  =========================================== */


/* ====================================  Functions declaration  ===================================== */


/*!
* @brief  初始化LED引脚
*
* @param none
* @return none
*/
void GPIO_LedInit(void)
{
    /*初始化引脚功能，有部分引脚上电默认为非GPIO，必须选择其功能为GPIO才能作为GPIO使用*/
	  GPIO_DRV_SetMuxModeSel(LED1_PORT, LED1_PIN, PORT_MUX_AS_GPIO); /*功能复用选择*/
    //GPIO_DRV_SetMuxModeSel(LED2_PORT, LED2_PIN, PORT_MUX_AS_GPIO);
    GPIO_DRV_SetMuxModeSel(LED3_PORT, LED3_PIN, PORT_MUX_AS_GPIO); /*功能复用选择*/
    GPIO_DRV_SetMuxModeSel(LED4_PORT, LED4_PIN, PORT_MUX_AS_GPIO);
	
	
		GPIO_DRV_SetMuxModeSel(K0_PORT, K0_PIN, PORT_MUX_AS_GPIO);
		GPIO_DRV_SetMuxModeSel(K1_PORT, K1_PIN, PORT_MUX_AS_GPIO);
		GPIO_DRV_SetMuxModeSel(K2_PORT, K2_PIN, PORT_MUX_AS_GPIO);
		GPIO_DRV_SetMuxModeSel(K3_PORT, K3_PIN, PORT_MUX_AS_GPIO);

	
	  GPIO_DRV_SetPinDirection(LED1_GPIO, LED1_PIN, 1); /*设置GPIO为输出*/
    //GPIO_DRV_SetPinDirection(LED2_GPIO, LED2_PIN, 1);
    GPIO_DRV_SetPinDirection(LED3_GPIO, LED3_PIN, 1); /*设置GPIO为输出*/
    GPIO_DRV_SetPinDirection(LED4_GPIO, LED4_PIN, 1);
	
		GPIO_DRV_SetPinDirection(K0_GPIO, K0_PIN, 1);
		GPIO_DRV_SetPinDirection(K1_GPIO, K1_PIN, 1);
		GPIO_DRV_SetPinDirection(K2_GPIO, K2_PIN, 1);
		GPIO_DRV_SetPinDirection(K3_GPIO, K3_PIN, 1);


    /*上电默认LED关闭*/
		LED1_OFF;
		//LED2_OFF;
		LED3_OFF;
		LED4_OFF;
		
		K0_OFF;
		K1_OFF;
		K2_OFF;
		K3_OFF;

}

/*!
* @brief  初始化按键引脚
*
* @param none
* @return none
*/
void GPIO_KeyInit(void)
{
    /*初始化引脚功能，有部分引脚上电默认为非GPIO，必须选择其功能为GPIO才能作为GPIO使用*/
    GPIO_DRV_SetMuxModeSel(KEY3_PORT, KEY3_PIN, PORT_MUX_AS_GPIO); /*功能复用选择*/
    //GPIO_DRV_SetMuxModeSel(KEY4_PORT, KEY4_PIN, PORT_MUX_AS_GPIO);

    GPIO_DRV_SetPinDirection(KEY3_GPIO, KEY3_PIN, 0); /*设置按键引脚为输入*/
    //GPIO_DRV_SetPinDirection(KEY4_GPIO, KEY4_PIN, 0);

    //GPIO_DRV_SetPullSel(KEY3_PORT, KEY3_PIN, PORT_INTERNAL_PULL_UP_ENABLED); /*使能按键引脚的上拉*/
    //GPIO_DRV_SetPullSel(KEY4_PORT, KEY4_PIN, PORT_INTERNAL_PULL_UP_ENABLED);
}

/*!
 * @brief GPIO配置
 *
 * @param none
 *
 * @return none
 */
void GPIO_Init(void)
{
    GPIO_LedInit();
    GPIO_KeyInit();
}


void Trigger_VoiceOn(uint8_t voice_id)
{
	if(voice_id > 3){
		return ;
	}
	
	if(VOICE_ID_0 == voice_id){
		K0_ON;
	}else if(VOICE_ID_1 == voice_id){
		K1_ON;
	}else if(VOICE_ID_2 == voice_id){
		K2_ON;
	}else if(VOICE_ID_3 == voice_id){
		K3_ON;
	}
	
	
}

void Trigger_VoiceOff()
{
		K0_OFF;
		K1_OFF;
		K2_OFF;
		K3_OFF;
}

/* ======================================  Functions define  ======================================== */


/* =============================================  EOF  ============================================== */