AirControlValve/User/protocol.h

/* Copyright Statement:
 *
 * This software/firmware and related documentation ("AutoChips Software") are
 * protected under relevant copyright laws. The information contained herein is
 * confidential and proprietary to AutoChips Inc. and/or its licensors. Without
 * the prior written permission of AutoChips inc. and/or its licensors, any
 * reproduction, modification, use or disclosure of AutoChips Software, and
 * information contained herein, in whole or in part, shall be strictly
 * prohibited.
 *
 * AutoChips Inc. (C) 2016. All rights reserved.
 *
 * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES
 * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("AUTOCHIPS SOFTWARE")
 * RECEIVED FROM AUTOCHIPS AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER
 * ON AN "AS-IS" BASIS ONLY. AUTOCHIPS EXPRESSLY DISCLAIMS ANY AND ALL
 * WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR
 * NONINFRINGEMENT. NEITHER DOES AUTOCHIPS PROVIDE ANY WARRANTY WHATSOEVER WITH
 * RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY,
 * INCORPORATED IN, OR SUPPLIED WITH THE AUTOCHIPS SOFTWARE, AND RECEIVER AGREES
 * TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO.
 * RECEIVER EXPRESSLY ACKNOWLEDGES THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO
 * OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES CONTAINED IN AUTOCHIPS
 * SOFTWARE. AUTOCHIPS SHALL ALSO NOT BE RESPONSIBLE FOR ANY AUTOCHIPS SOFTWARE
 * RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR
 * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND AUTOCHIPS'S
 * ENTIRE AND CUMULATIVE LIABILITY WITH RESPECT TO THE AUTOCHIPS SOFTWARE
 * RELEASED HEREUNDER WILL BE, AT AUTOCHIPS'S OPTION, TO REVISE OR REPLACE THE
 * AUTOCHIPS SOFTWARE AT ISSUE, OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE
 * CHARGE PAID BY RECEIVER TO AUTOCHIPS FOR SUCH AUTOCHIPS SOFTWARE AT ISSUE.
 */
 

#ifndef PROTOCOL_H
#define PROTOCOL_H

#ifdef __cplusplus
extern "C" {
#endif

#include "ac780x.h"

#define Cmd_FirmwareVersion    (0x0000)
#define Cmd_HardwareVersion    (0x0008)
#define Cmd_DeviceID    			 (0x0009)
#define Cmd_DeviceType    		 (0x000B)
#define Cmd_Reboot		 		     (0x000C)
#define Cmd_Reset    					 (0x000D)

#define Cmd_Addr    					 (0x0010)
#define Cmd_Baudrate    			 (0x0011)
#define Cmd_DateTime					 (0x0012)
#define Cmd_LockStatus    		 (0x0020)
#define Cmd_LockOp    		 		 (0x0021)
#define Cmd_Threshold    		 	 (0x0022)
#define Cmd_ReadThreshold    	 (0x0023)
#define Cmd_ReadAngle    	 		 (0x0027)
//#define 
#define Cmd_ReadRecordNum    	 (0x0029)
#define Cmd_ReadRecords	       (0x002A)
#define Cmd_RecordDelete  		 (0x005A)

#define Cmd_IapUpgrade    		 (0xAABB)

#define MB_FUNC_03				(0x03)
#define MB_FUNC_06				(0x06)
#define MB_FUNC_10			  (0x10)
#define MB_FUNC_42				(0x42)  //for iap 

#define NO_EXCEPTION						(0x00)
#define INVALID_FUNCTION_CODE   (0x01)
#define INVALID_COMMAND			    (0x02)
#define INVALID_DATA   					(0x03)
#define DEVICE_FAULT   					(0x04)

#define SIZE_RECORD							(8)
#define MAX_RECORDS_PERTIME     (12)

//读取时返回，数据长度, 如果返回 0， 说明buf_len 不够, 设备故障

uint16_t Read_FirmwareVersion(uint8_t *pBuf, uint16_t buf_len); 
uint16_t Read_HardwareVersion(uint8_t *pBuf, uint16_t buf_len); 
uint16_t Read_Deviceid(uint8_t *pBuf, uint16_t buf_len); 
uint16_t Read_Devicetype(uint8_t *pBuf, uint16_t buf_len); 
uint16_t Read_Addr(uint8_t *pBuf, uint16_t buf_len);
uint16_t Read_Baudrate(uint8_t *pBuf, uint16_t buf_len); 

uint16_t Read_LockStatus(uint8_t *pBuf, uint16_t buf_len); //读取锁状态 
uint16_t Read_Threshold(uint8_t *pBuf, uint16_t buf_len);//读取开锁、上锁阀值 
uint16_t Read_Angle(uint8_t *pBuf, uint16_t buf_len);//读取编码器角度值  
uint16_t Read_DateTime(uint8_t *pBuf, uint16_t buf_len);//读取设备日期时间 

uint16_t Read_RecordsNum(uint8_t *pBuf, uint16_t buf_len);//读取设备历史记录条数
uint16_t Read_Records(uint8_t num, uint8_t *pBuf, uint16_t buf_len);//读取历史记录


#define RET_ERROR_MASK    (0xF0)
#define RET_OK  		 			(0x00)
#define RET_NEED_SAVE			(0X01)
#define RET_NEED_REBOOT		(0X02)

#define RET_DATAINVALID  	(0x10)
#define RET_CMDINVALID  	(0x20)
//#define RET_DATAINVALID  	(3)


//写入成功时返回 RET_OK
//写入不成功时，返回 RET_DATAINVALID
uint8_t Write_Addr(uint8_t *pdata, uint8_t len); 
uint8_t Write_Baudrate(uint8_t *pdata, uint8_t len);
uint8_t Write_HardwareVersion(uint8_t *pdata, uint8_t len); 
uint8_t Write_Deviceid(uint8_t *pdata, uint8_t len); 
uint8_t Write_Devicetype(uint8_t *pdata, uint8_t len);

uint8_t Write_LockOp(uint8_t *pdata, uint8_t len); //开锁、上锁操作
uint8_t Write_ThresholdCalibration(uint8_t *pdata, uint8_t len); //开锁阀值、上锁阀值标定
uint8_t Write_DateTime(uint8_t *pdata, uint8_t len);//标定设备日期时间 

uint8_t Write_RecordsDelete(uint8_t *pdata, uint8_t len);//读取设备历史记录确认 

    
#ifdef __cplusplus
}
#endif

#endif /* PROTOCOL_H */