/* Copyright Statement: * * This software/firmware and related documentation ("AutoChips Software") are * protected under relevant copyright laws. The information contained herein is * confidential and proprietary to AutoChips Inc. and/or its licensors. Without * the prior written permission of AutoChips inc. and/or its licensors, any * reproduction, modification, use or disclosure of AutoChips Software, and * information contained herein, in whole or in part, shall be strictly * prohibited. * * AutoChips Inc. (C) 2016. All rights reserved. * * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("AUTOCHIPS SOFTWARE") * RECEIVED FROM AUTOCHIPS AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER * ON AN "AS-IS" BASIS ONLY. AUTOCHIPS EXPRESSLY DISCLAIMS ANY AND ALL * WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED * WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR * NONINFRINGEMENT. NEITHER DOES AUTOCHIPS PROVIDE ANY WARRANTY WHATSOEVER WITH * RESPECT TO THE SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, * INCORPORATED IN, OR SUPPLIED WITH THE AUTOCHIPS SOFTWARE, AND RECEIVER AGREES * TO LOOK ONLY TO SUCH THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. * RECEIVER EXPRESSLY ACKNOWLEDGES THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO * OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES CONTAINED IN AUTOCHIPS * SOFTWARE. AUTOCHIPS SHALL ALSO NOT BE RESPONSIBLE FOR ANY AUTOCHIPS SOFTWARE * RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND AUTOCHIPS'S * ENTIRE AND CUMULATIVE LIABILITY WITH RESPECT TO THE AUTOCHIPS SOFTWARE * RELEASED HEREUNDER WILL BE, AT AUTOCHIPS'S OPTION, TO REVISE OR REPLACE THE * AUTOCHIPS SOFTWARE AT ISSUE, OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE * CHARGE PAID BY RECEIVER TO AUTOCHIPS FOR SUCH AUTOCHIPS SOFTWARE AT ISSUE. */ #ifndef PROTOCOL_H #define PROTOCOL_H #ifdef __cplusplus extern "C" { #endif #include "ac780x.h" #define Cmd_FirmwareVersion (0x0000) #define Cmd_HardwareVersion (0x0008) #define Cmd_DeviceID (0x0009) #define Cmd_DeviceType (0x000B) #define Cmd_Reboot (0x000C) #define Cmd_Reset (0x000D) #define Cmd_Addr (0x0010) #define Cmd_Baudrate (0x0011) #define Cmd_DateTime (0x0012) #define Cmd_LockStatus (0x0020) #define Cmd_LockOp (0x0021) #define Cmd_Threshold (0x0022) #define Cmd_ReadThreshold (0x0023) #define Cmd_AngleCalibration (0x002B) #define Cmd_ReadAngle (0x002C) #define Cmd_DeviceInfo (0x002E) //#define #define Cmd_ReadRecordNum (0x0030) #define Cmd_ReadRecords (0x0031) #define Cmd_RecordDelete (0x0061) #define Cmd_IapUpgrade (0xAABB) #define MB_FUNC_03 (0x03) #define MB_FUNC_06 (0x06) #define MB_FUNC_10 (0x10) #define MB_FUNC_42 (0x42) //for iap #define NO_EXCEPTION (0x00) #define INVALID_FUNCTION_CODE (0x01) #define INVALID_COMMAND (0x02) #define INVALID_DATA (0x03) #define DEVICE_FAULT (0x04) #define SIZE_RECORD (8) #define MAX_RECORDS_PERTIME (12) //读取时返回，数据长度, 如果返回 0， 说明buf_len 不够, 设备故障 uint16_t Read_FirmwareVersion(uint8_t *pBuf, uint16_t buf_len); uint16_t Read_HardwareVersion(uint8_t *pBuf, uint16_t buf_len); uint16_t Read_Deviceid(uint8_t *pBuf, uint16_t buf_len); uint16_t Read_Devicetype(uint8_t *pBuf, uint16_t buf_len); uint16_t Read_Addr(uint8_t *pBuf, uint16_t buf_len); uint16_t Read_Baudrate(uint8_t *pBuf, uint16_t buf_len); uint16_t Read_LockStatus(uint8_t *pBuf, uint16_t buf_len); //读取锁状态 uint16_t Read_Threshold(uint8_t *pBuf, uint16_t buf_len);//读取开锁、上锁阀值 uint16_t Read_Angle(uint8_t *pBuf, uint16_t buf_len);//读取编码器角度值 uint16_t Read_Devinfo(uint8_t *pBuf, uint16_t buf_len); //读取设备状态及ibutton 信息 uint16_t Read_DateTime(uint8_t *pBuf, uint16_t buf_len);//读取设备日期时间 uint16_t Read_RecordsNum(uint8_t *pBuf, uint16_t buf_len);//读取设备历史记录条数 uint16_t Read_Records(uint8_t num, uint8_t *pBuf, uint16_t buf_len);//读取历史记录 #define RET_ERROR_MASK (0xF0) #define RET_OK (0x00) #define RET_NEED_SAVE (0X01) #define RET_NEED_REBOOT (0X02) #define RET_DATAINVALID (0x10) #define RET_CMDINVALID (0x20) //#define RET_DATAINVALID (3) //写入成功时返回 RET_OK //写入不成功时，返回 RET_DATAINVALID uint8_t Write_Addr(uint8_t *pdata, uint8_t len); uint8_t Write_Baudrate(uint8_t *pdata, uint8_t len); uint8_t Write_HardwareVersion(uint8_t *pdata, uint8_t len); uint8_t Write_Deviceid(uint8_t *pdata, uint8_t len); uint8_t Write_Devicetype(uint8_t *pdata, uint8_t len); uint8_t Write_LockOp(uint8_t *pdata, uint8_t len); //开锁、上锁操作 uint8_t Write_ThresholdCalibration(uint8_t *pdata, uint8_t len); //开锁阀值、上锁阀值标定 uint8_t Write_DateTime(uint8_t *pdata, uint8_t len);//标定设备日期时间 uint8_t Write_RecordsDelete(uint8_t *pdata, uint8_t len);//读取设备历史记录确认 uint8_t Write_AngleCalibration(uint8_t *pdata, uint8_t len);//编码器校准 #ifdef __cplusplus } #endif #endif /* PROTOCOL_H */