#include "Ds1302.h"
#include "string.h"
#include "gpio.h"
#include "stdio.h"
#include "ac780x_rtc.h"
#include "ac780x.h"



DateTime g_dateTime;

/**
 * RTCCallBackFunc
 *
 * @param[in]  wparam: reserved
 * @param[in]  lparam: reserved
 * @return 0: success, other: error value
 *
 * @brief  中断回调函数
 * 改变LED输出，使得LED闪烁
 */
void RTCCallBackFunc(void *device, uint32_t wpara, uint32_t lpara)
{
	
	if (wpara & RTC_SC_RPIF_Msk) //预分频中断
	{
	
	}
	if (wpara & RTC_SC_RTIF_Msk) //RTC溢出中断
	{
		//printf("g_timer0Cnt:%d \r\n", g_timer0Cnt);
		DS1302_UpdateTime();
	}	
	
}

/**
 * RTC_Timeout1s
 *
 * @param[in]  none
 * @return   none
 *
 * @brief  配置RTC计时1S，时钟源为Bus clock
 */
void RTC_Timeout1s(void)
{
    uint32_t tmpMod = 239999;
    uint32_t tmpPrescalerValue = 99;             //（99+1）*（239999+1）/24000000 = 1s
    RTC_ConfigType RTCConfig;
	
		memset(&RTCConfig,0,sizeof(RTCConfig));

    RTCConfig.clockSource = RTC_CLOCK_APB;                         //时钟源选择：0:Bus clk (demo板上总线时钟为24M)；
	                                                   //1: LSI 32KHz; 2: External OSC; 3:Internal 8M;
    RTCConfig.periodValue = tmpMod;
		RTCConfig.psrInterruptEn = DISABLE;
    RTCConfig.rtcInterruptEn = ENABLE;
    RTCConfig.psrValue = tmpPrescalerValue;      //time = (pre+1)*(mod+1)/clk
    RTCConfig.rtcOutEn = DISABLE;
    RTCConfig.callBack = RTCCallBackFunc;
    RTC_Init(&RTCConfig);                        //配置RTC


}




void DS1302_Init(void)
{

	g_dateTime.year = 24;
	g_dateTime.month = 7;
	g_dateTime.day = 5;
	g_dateTime.hour = 15;
	g_dateTime.minute = 0;
	g_dateTime.second = 0;
	
	RTC_Timeout1s();
	

}

uint8_t Ds1302_ReadReg(uint8_t _address)
{

	
	return 0;
}


void DS1302_SetTime(DateTime* pDateTime)
{

}


void DS1302_UpdateTime()
{
	g_dateTime.second++;
	if(g_dateTime.second >= 60){
		g_dateTime.second=0;
		g_dateTime.minute++;
		if(g_dateTime.minute >= 60){
			g_dateTime.minute=0;
			g_dateTime.hour++;
			if(g_dateTime.hour>= 24){
					g_dateTime.hour=0;
					g_dateTime.day++;
			}
		}
	}
	
	//if(g_dateTime.day>= 3){
	//
	//}


}


void DS1302_PrintDateTime()
{

	
		printf("DS1302 DateTime:[%d][%d][%d] \r\n", g_dateTime.hour, g_dateTime.minute, g_dateTime.second);

}


void DS1302_DeInit(void)
{

}